Recent content by ek amigo

Hi Kelvin thanks for your reply , i am not sure what my sparkie has or has not done , but am interested in questions I can put to him from experts like yourself.

Just wondering if anybody can advise me . I have put a UCF11 1991 with its 30-41LE auto into an old holden , utilising the standard computer 89661-50102 26p/16p/22p/26p . the engine seems to run fine but it changes quickly up through the gears and won't change down, basically until you stop or...

Its a 1UZ UCF11 1991 running stock ecu etc , it.s been transplanted into an old car , just for cruising.

thanks , will change things around a bit , its a 1991 UCF11 .

I have been told that changing from the standard toyota 2 speed fuel pump system to a single speed causes problems , so I am wondering whether this set up would work . fuel tank -------single speed pump mounted close and below the fuel tank--------fuel regulator--------fuel filter------fuel...

thanks gents ,the reason I ask is that the car is pretty old (EK Holden ) and the existing tank is only 150 mm deep , I have been told I need a surge tank , high and low pressure pumps , regulator and inline filters etc , just though it might be easier to take the old tank out and replace it...

Had a good search but couldn't find any info , is a soarer fuel tank from a non 1uz model suitable for a 1uz conversion ?

no I am at home ,have no trouble with other forums. for example when I open Blown ea in the swaps conversion section , the guy says "here are some pics of my project " they aren't there for me but obviously are when you read the following threads.

Just wondering if its just me but when I go through the forums I don't get any pictures

ek V8 Hi There I see you are in Hamilton , what do you reckon is it a good idea, If it fits in without to much trouble it would be a good option, going on what I have read.

V8 into EK Holden Hi Greg. Thanks for your generous offer to help. I am very seriously considering the toyota V8 and auto option into my EK Holden. I have a Hr crossmember and one of your trans tunnels installed. Could you please describe the major problems or alterations needed to fit the...