Recent content by azza118

yes maby its just like a secondary housing with another inlet and out let, would anyone have pics on what a normal one looks like? or how they plumbed theirs up. thanks gys.

at the rear of the pump there is 2 inlets one around 3/4 and the other about 1inch then 2 outlets of the same size.

hey guys, im putting a 1uz into my 97 hilux. the G52 that was originaly in there had a cabel speedo the new r151 box thats goin in there is electric, is there any way to make it work? cheers

hi, im trying to plumb up my 1uz stering pump to a hilux steering box.on the pump there is 2 inlets and 2 out outlets. the smaller one being at the rear. ive caped off the front section and intend to use the rear. is this the rite thing to do? im wondering if the front section will seize as it...

how much to do a set of headers?

hi, im trying to plumb up my 1uz stering pump to a hilux steering box.on the pump there is 2 inlets and 2 out outlets. the smaller one being at the rear. ive caped off the front section and intend to use the rear. is this the rite thing to do? im wondering if the front section will seize as it...

hi, just finished fabricating my own set of headers for my hilux. whats the most effective coating i can get done on them to prevent them from rusting. Even the heat proof paint u can by still does burn off. cromeing would be nice but a bit pricy. ive heard nickle plating will still rust? any...

hi, im trying to plumb my hilux steering box to the 1uz powersteering pump. on the pump i think there is to inlets which are around 1 inch and 3/4 and just have a oring seal with one bolt holding the pipe in place and 2 out lets which are threaded and smaller in diamiter around 1/2 inch. which...

looks like is staying then. cheers

yeah? whats it do? silencer?? just wondering if i should remove it and run my intake pipeing from the throttle body straight to the air box or start my pipeing from the plastic tube. it sits almost on the rocker cover ud think it would heat up the air as its going into the throtle body tho.

on the 1uz motor there is a black plastic pipe before the throttle body, under neath this pipe there is another black plastic airbox that is connected to the pipe, does anyone know what it is for and if u need to keep it. thanks

<P>hi, </P> <P>im puting a 1uz in my hilux and a problem i have come across is that the oil filter hits on the chassie rail and im unable to un screw it. Instead of spending 200 bux on a relocation kit which is still about 70mm long when u have the 2 elbow bends for the oil lines on is there a...

hey gys. im useing a 1uz fe in my hilux converson. my snorkle is on the passenger side and the throttle body on the 1uz is on the driver side. ive seen pictures wherer the whole top intake manifold is reversed around so that the throtle body is on the passenger side thus making it alot easier...

just headders and exaust and cold air intake will get me 50hp??? :D whats a good but cheep ecu just for running a N/A engine? and how much?

yeah well thats why i dont want to FI it. id b happy with another 50-70hp