Recent content by 1UZPWR

here you are http://a1turbos.co.nz/mm5/merchant.mvc?Screen=PROD&Store_Code=A&Product_Code=manifolds&Category_Code=1QT

another thing worth knowing. More often than not, it's the bucket that has been pounded, and the shim is fine. Obviously remeasure after install, but there's a good chance that changing just the bucket will bring it back to within specs.

:D that was me! Excellent service from Kelvin, and very friendly too. The flywheel you use is a really nice looking piece. I thought I'd give the MR2 flywheel a shot, just in case it fit so I wouldn't have to worry about cutting and smoothing the welds. flexplate ring gear it is, plus it's...

BUGGER!!! the inner diametre of the ring gear is bigger than the shoulder on the flywheel. the overall diametre is about 7mm too large, for a 3.5mm gap all the way around. 100% confirmed, the MR2 ring gear does NOT fit the A1turbos flywheel, and therefore must have a larger inner diametre than...

perhaps now that it's all welded, it wouldn't be a bad idea to cut some slots between in the flanges, between each port, to allow thermal expansion of each individual pipe/flange area

I have an A1 turbos flywheel, it looks great! the ring gear for the MR2 flywheel is available seperately. i ordered one today, should be in tomorrow. I'll post up if it fits :D

i keep expecting the co-driver to suddenly bang a hammer and say "SOLD! for (x amount) of dollars" Definitely could be an auctioneer lol

Here we are http://forum.ih8mud.com/70-series-tech/64321-4-0l-v8-1uz-fe-land-cruiser-uzj79.html no pics of the flywheel, but on page 3 you can see the scary looking 2 piece bellhousing. I wonder what's going on in there. and here are some prices to scare you away...

yes it's massive there were pictures up somewhere let me go take a look around

how much for the passenger door window glass? I found one for a $100 local, so it's probably not worth buying from you by the time shipping is added in, but i thought i'd ask anyways are the door hinges any good? shipping would be to 98281

the interior temp sensor not only needs to be plugged in, but also, there might be a plastic tube running to it that needs to be connected i don't know if the SC has that, but other lexus models with auto climate control do have that, and if it's not connected, the temp goes all crazy.

correct me if i'm wrong, but on the shift boot/trim piece i believe that the lexus emblem unclips, leaving the correct holes for seat heaters. therefore, that piece works for everyone

http://www.jzx100.com/forum/ dig around in there, quite a bit of info

Superrunner's aren't from scratch, they're modified, just so you know :P

search for user "superrunner" on here he had a bunch of new flywheels modified for 1UZ application, and they allow the use of a variety of clutches from various toyota models, allowing you to use a pull or a push type clutch.