New Profile Posts

  1. Synchromash
    Synchromash
    I'll be honest, I'm just here to swap sump parts because I wasn't in the know enough when I bought my motor.
  2. Kirk
    Kirk andrewzuku
    Hey Andrew
    Stumbled across the Hilux you built. Thought I'd let you know it's still alive. I bought it around a month ago.
    The last owner just fitted a new 4.8 ratio lsd.
    I've repaired and welded the floor pans and replaced the seats.
    It's currently in getting a new splitronics ecu, tcu and wiring loom. Then a Dyno.
    I plan to use it as my daily.
    Love your work
  3. Swan song
    Swan song gloverman
    Do you know if the IACV is constantly used to maintain the idle for the engine? Or is the IACV only for when the motor is cold, and once the engine is warmed up it should be able to idle all on its own?
    1. gloverman
      gloverman
      used all the time.
      Jun 25, 2018
  4. Swan song
    Swan song gloverman
    What is the detailed process for taking this IACV motor apart?
    1. gloverman
      gloverman
      Sorry i dont have a detailed process. I sort of just know how to do it. Theres a bit of a trick to prying it in just the correct spot for the crimps to let go.
      Jun 25, 2018
  5. Swan song
    Swan song gloverman
    One other issue I should mention is that it would idle 1 out of 10 starts. It would adjust idle, and at some point die. Now, however, even resetting the battery power, it won’t idle at all. I’m thinking it needs an IACV. alas, it is the type with no screws to rebuild the IACV motor and bearings.
    1. View previous comments...
    2. gloverman
      gloverman
      Yes mrel opens the relay for +b and +b1 and the IAC. Fc and fpr can be tethered to negative trigger a relay for the fuel pump.
      Jun 10, 2018
    3. gloverman
      gloverman
      To pull the IAC apart you remove the roll pin to remove the motor from the body.
      Jun 10, 2018
    4. gloverman
      gloverman
      Then strip the motor apart. Theres a trick to pry them to bits.
      Jun 10, 2018
      Swan song likes this.
  6. Swan song
    Swan song gloverman
    1. gloverman
      gloverman
      Hello. Have you tested the IAC as I suggested to ( Dave ) holmsy in that thread? What was the result? I thought I'd sorted most of vinces poor wiring jobs but it appears not.
      Jun 7, 2018
    2. Swan song
      Swan song
      Well, I’ve never met Vince. I wired my entire swap using this wiring diagram for the relays: https://i.imgur.com/Cu5F8js.jpg
      I’m pretty good with wiring, but can’t help wondering if there is a splice I accidentally cut out that would feed power to the IACV. I haven’t checked the IACV for power since it’s a nightmare to get my leads into the plug. That will be my next step.
      Jun 7, 2018
  7. Paj4000
    Paj4000 ak47prince
    Hi mate do you have a basic list of wires that need to be powered and grounded to power up a 1uzfe ecm. Thanks
  8. Jason Feck
    Jason Feck
    Hi guys, first time posting, but really want to find someone who has manufactured a ITB manifold for the 1uz vvti engines?
  9. George_R
    George_R
    naeem yes I can do i, pm or email me, or go to my facebook group called ALL4SWAP
  10. naeem
    naeem George_R
    HELLO MR GEORGE can you decode ecu 1mzfe camry 2006
  11. F3ARED
    F3ARED hungryforinfo
    Hey mate, probably a long shot given you havent logged in in a while but stumbled across your posts when researching 1UZ into Disco1. Any chance you still have the adaptor and or have photos of it?
  12. Brenton Curtis Tyler
    Brenton Curtis Tyler Lextreme
    Hey man....I may have ended up with one of your old engines, and had a few questions for you...
  13. Brenton Curtis Tyler
    Brenton Curtis Tyler
    Losing what's left of my mind.
  14. Zaurator
    Zaurator Zuffen
    Greetings from Russia.
    Tell me please where can I find the tuning section and improvements on 1uzfe. build a car for drift. so where is better to snap spare parts
  15. Rodan Wrangler
    Rodan Wrangler gloverman
    1. gloverman
      gloverman
      Hello James. There are a few suppliers of manifolds over here and they are often hard to deal with. Check out CSL camshafts in Palmerston north and Hartley engineering. (hartley race engines) . If you don't have luck with these guys we can go back to the drawing board. If you need an NZ address to send it to I can help then I can post it as a gift.
      Feb 15, 2018
  16. odelarosa
    odelarosa
    Toyota Altezza 1uz VVT-I MT(W58)
  17. Nomoreworries
    Nomoreworries
    NEED STARTER HELP PLEASE
  18. Nomoreworries
    Nomoreworries
    I ls400 put a starter in , just hooked up starter wires, should the starter turn over without anything else hooked up
  19. uknuta713
    uknuta713 samsdad
    Hi,
    I was wondering if you had a pin out for a 89661-50380 ecu from a ucf21?
  20. Courier 1uzfe
    Courier 1uzfe
    Looking for more HP