Need Help Now

The 1UZFE EGR Delete Kit is available for sale here.

shadowlex

New Member
Messages
3
Location
abilene, tx
I recently changed my timing belt, cap, rotor, plugs and wires. When i finished putting it all back together the check engine, and trac light was on, i ran the code and i think it was a 13 or a 31 not really sure. I kept driving it and the check engine light would go away after about 10 minutes of driving that was a week ago just today i went out to start it and it wouldn't crank, and all i get is the traction control unit doing a lot of clicking when i put the key in the on position. If someone has any idea please let me know????
 
1. Check the engine bay fuse box- there is a black color starter relay. If that thing is loose or something wrong with it, the car will not start. I have many times with this problem. Temporary solution for my condition is to move the relay a little and the car start right up.

2. Check the battery - Possible its two problems occurred at once.

3. Try to unplug the battery to see if the codes/lights reset it self.

How is your car idling? and how it your engine rev from idle to redline? Any back fire?
 


Top