1uz Bolt Pattern

[xirforever]

hey guys, does anybody know the bolt pattern for the 1uz flexplate? I have heard that each bolt is 80mm from the center of the plate to center of the bolt, which yeilds a 61.229mm x 8 bolt pattern. I would really like to hear from the community if this is right or wrong, if wrong, what do you suggest.

Thanks,
Nick

 

[cjsupra90]

NO, its an 80mm P.C.D.

Or more correctly stated 8 on 80mm P.C.D.

here, this should help

 

[cjsupra90]

ok, dont know why the attachment didn't work, but here is what it was soppost to be.

 

[xirforever]

ahhhhh thank you very much!

do you happen to know the center hole size also?

 

[cjsupra90]

42mm bore and the crank spigot measured 39.95mm

Hope that helps.

Chris



EDIT: The correct crank spigot size is 41.95mm

 

[Lextreme II]

Xir,

Your plate sent......

 

[xirforever]

you guys are great, im very much obliged