Search results

  1. UCF11

    3UZ-FE Tachometer pulse / signal type

    Hi guys Does anyone know what pulse the 3UZ rpm/tacho output is from the ECU? I know the old 1UZ via one ignitor is effectively a 4 cylinder output tacho (2 pulse?) Just need to workout if I need a signal adaptor / converter (eg dakota digital SGI8) to go between the 3UZ ECU output and...
  2. UCF11

    Parts FS Universal Transmission Controller PCS TCM-2000

    PCS (Powertrain Control Solutions) TCM-2000 Automatic controller. $850 USD + Shipping. 6 months old. In perfect condition. Only selling due to project direction change Full featured automatic transmission controller, can do nearly any 4, 5 and 6 speed automatic from the 1980s to...
  3. UCF11

    Wanted WTD 1997-2000 V8 VVTi Intake pipe

    Hi Guys, Looking for the intake pipe & flexible join between the airbox and engine throttle body that goes on the VVTi SC400 models, as pictured. Also need shipping to Auckland City, New Zealand if possible. Circled in red on the right.
  4. UCF11

    V8 Engines, 1UR-FSE vs 1UR-FE

    Hey lads. I'm quite perplexed at my findings. Theres these two engine in the newer 2006+ Lexus GS460, and LS460, plus a few other models. Where I am baffled is some sources are saying for the 1UR-FE, 347hp and 460nm.... While others claim the Direction injection of the fancy 1UR-FSE...
  5. UCF11

    2JZ-FSE D4 spoecifications

    Hey lads. Just on the hunt for a factory power and torque curve chart & specifications for the quirky 2JZ-FSE direct injection version of the engine from the Toyota Brevis / Crown range of the early 2000s. I'm just curious to see a direct comparison to the regular vvti 2jz-ge. Cheers
  6. UCF11

    Parts FS: A650e Auto Valve Body upgrade ITP Trans (shift kit)

    Hi there, I have here for a sale an A650e Valve body / shift kit modified by ITP Transmission in New York. (Modification costs $780 USD alone!) This has been modified to a stage 1.5 level giving nice firm crisp shifts, no more slurring from gear to gear. The valve body originally came...
  7. UCF11

    Wanted Wanted, Fan idler pulley, 16371-50030

    Hey, After the idler pulley that drives the vicous fan, believe the part number is 16371-50030 But it looks like this Let me know if you have one, I also require it sent to New Zealand
  8. UCF11

    Wanted WTD, SC400 1997-2000 5 speed auto driveshaft

    Hi Guys, as per title after a stock drivehsaft for, SC400 1997-2000 5 speed auto A650E These run a larger yoke than the earlier 4 speed type. PM me if you have any such parts!
  9. UCF11

    Stock ECU Compatibility (JDM vs USA?)

    I have a 1992 - 1994 1UZ with a JDM Celsior ECU, part number 89661 50170 or 89661 50171 that has been repaired a couple of times and has finally given up for good. The ECU has a 34, 22, 16, 28 pin configuration I'm having trouble finding a stock JDM replacement locally, I'm aware too...
  10. UCF11

    BMW E36 Coupe conversion

    Well, It has taken it's time but my cars very nearly complete. I've finally got the last few minor things to get sorted for the certification for February. Over the last few months I addressed all the main issues I needed to address, it meant replacing the whole front suspension setup so now...
  11. UCF11

    1UZ-FE E36 Coupe Conversion

    Well, It has taken it's time but my cars very nearly complete. I've finally got the last few minor things to get sorted for the certification for February. Over the last few months I addressed all the main issues I needed to address, it meant replacing the whole front suspension setup so now...
  12. UCF11

    1UZFE idle tick...

    I've become increasingly more suspicious of this tick my 1UZ has at idle. I thought it sounds like a crank related noise, it seems to come from around the oil pan area of the car and disappears once the engine gets up to revs above 1000rpm or so My exhaust welder reckons it could be a...
  13. UCF11

    Would an a650e operate with no TCU or power?

    I am looking to install an a650e gearbox and have it operate with a PCS TCM-2000 controller next month. However I was curious to what level the gearbox would operate mechanically with no electrical aid? Would the gears be manually selectable from p, r, n, 1, 2 through to 3rd? Just wondered...
  14. UCF11

    Wanted WTD - 1UZFE Hydraulic Fan Pump

    Hi guys, I am after the stock 1UZ fan pump unit with the pulley that come on some of the V8 engines. If you have one to sell please let me know, and your price, a picture would be ideal so I can see what kind of condition it's in. I would also need it to be shipped to Auckland New...
  15. UCF11

    Mikes V8 E36

    So I finally got the project speeding along the last few months, now the cars on the road and performing great. Trouble is I want more power! At the moment I am just fine tuning all the little things and getting the exterior up to spec. (Bumpers Painted!) Off to the paint shop...
  16. UCF11

    1UZ missing at full throttle under 45km/h

    Mmm okay, so I have recently put a 1UZFE + A431E into my BMW E36 Coupe. It runs fantastically, however if I am going 0-45km/h and put it in Drive gear, and floor it to full throttle it sort of misses and hunts, repeats until it goes over 50km/h before powering ahead normally to the redline...
  17. UCF11

    Trade Complete front sump to swap with complete rear sump

    G'day, I have a complete front sump from an LS400, upper pan, lower pan, baffle plate, pick up and dipstick. After a straight swap for a SC400 rear sump with upper and lower pan, baffle plate and dipstick. I'm in New Zealand.
  18. UCF11

    Headers on 3UZFE LS430, SC430 or GS430?

    Has anyone here put custom or after market headers on their 3UZFE LS430, SC430 or GS430? If so what kind of gains did you achieve?
  19. UCF11

    Wanted WTD: 1UZFE Crown log headers

    G'day A long shot, but I've been looking for a pair of old crappy compact log style headers from a crown V8, anyone able to help there? If so I'm in NZ, would need shipping to Auckland NZ. Cheers in advance.
  20. UCF11

    A650E + Early 1992 1UZFE - will it bolt up?

    I have an early 1992 Lexus V8, but I want to run the 5 speed automatic from the VVTi 1UZFE LS400 and GS400s. The A650e boxes can be had dirt cheap here as no body wants them so I figured it might be the best to get one and use it with my 1992 1UZ. I will be controlling it with a stand alone...


Top