Search results

Any experience with elatemfg.com intercooled manifold for 1uzfe non VVT manifold ? I'm looking to upgrade my current set up (7psi , Ridgewood manifold with M90 with Adaptronic ECU) to intercooled Magnuson TVS 2400, separate 8 rib pulley ...

I'm in process of fitting MP2300 (TVS 2.3L) supercharger on SC400 '93 with 8 rib Crank pulley mounted supercharger - see pictures. Does anybody has CAD of crank pulley adapter and CAD plate for belt tensioner, something similar to below ? Thanks

Hi all, I was thinking replacing my current M90 on Ridgewood (shaved 10 mm off) manifold with Whipple 2.3L or 2.9L (140AX / 175AX). My SC400 '93 currently has E420C ECU and T56 manual trans, Rush headers going in soon, stock 125k mines engine. Looks like a quick search on this forum regarding...

Hi everybody, Recently swap my SC400 auto trans with T56 on my boosted M90 with E420C and my only problem is driveshaft vibration in the first gear, just few seconds after releasing clutch. In the all others gears and high speed are ok. Looks like when driveshaft start rotation in the first...

Hi everybody, I need S/C Pulley Adapter for Richwood Kit (7psi, mount on M90) new or used in good shape. Thanks.

Just want to find if somebody done this conversation from 7psi to 12psi – using M90. I am trying to find anything on this forum about converting Richwood kit, from 7psi to 12psi, but no too many info on it, or I just can not find it. I read about changing crank pulley, supra injectors 315cc...

My problem is running lean on one side of V8 under 7psi boost, after 5-6 second at 7psi. Car is running perfectly in vacuum, first sec in the boost (7psi), both side running rich. After 5-6 sec one side of v8 going from rich to lean. Let me give you more info about my set up. I had '93 sc400...

My engine (1UZFE sc400 '93 with Richwood M90 kit - 7 psi, over 200K miles) problem starts 4 months ago, I will try to explain as much as I can, hopefully some one can help. First of all what was good, starting engine - ok, idling high 1100 rpm ??, shift to "D" 750 rpm. So, when problem started I...

Hi everyone, Recently I notice some problem with my car and found engine oil in air intake (M90 with Richwood 7 psi kit). I think oil coming in air intake from small hose from bottom of engine (I will check where is connected) and it is connected to "P" on throttle body. Is anybody now what...

Hi everyone, I have problem with my SC400 '93 210k miles with M90 s/c (Richwood manifold) + FMU, everything else stock, all sensors original. Car was running very good for 2 years, the only problem that I had was some smell, like gas when car stop and poor idle when car is cold. I found that...

Hi, I have a problem to find somebody to upgrade my sc400 '93 in NYC area. I have already installed M90 working at 5.5 psi (FAT kit) , same manifold what Richwood Technologies offers. Car is working good almost a year with M90, but I would like to go on 12 psi. I had alot of problems to find...

Hi everybody,:saeek: I am new on this forum, and I have one question. I install recently Eaton M90 on my SC400 '93 and I notice that my car hesitate between 1500 and 2000 rmp. On the same rpm (when hesitate) range car-trans looks like shift to neutral and after 2000 rpm connect to current gear...