Search results

I want to buy some from a vendor when I get my tune-up parts, but the descriptions are pretty loose on aftermarket exhaust gaskets. Does anyone know, say the correct Bosal PN for the convertor to pipe gaskets?

Anyone have the pleasure of having their stock trans rebuilt?

Just got through reading about the upcoming IS-F; 5.0(stroked 4.6) V-8, with 416hp/371tq. The car weighs in at 3700 or so, with an electronic, performance-oriented 8 speed automatic that shifts in a tenth of a second. All at a price of $60K.

I've managed to come up with a code 12 recently, along with no spark on both sides. Both the cam sensors, and the crank sensor check out OK on the ohms test; anything else that I can check out besides the wiring itself?

http://www.supraforums.com/forum/showthread.php?t=267655 I found this (finally)after some time scrounging around in Jeep forums,trying to find anything I could about improving the Aisin Warner trans w/out spending $500 for a basic shift kit. It looks like a decent solution for the slushy...

I'm curious as to what the dimensions are for the B2 accumulator springs on the Lexus Aisin Warner a340e units? I only have the engine power that the Supra TT came with in my SC, and won't likely be getting much more, so am considering an accumulator spring swap, since the C2 spring...

I found a sliver-portion of what appeared to be a pinion gear lobe attached to the magnetic plug. Hmmmmmmmm. This was only an eighth of an inch wide by a half inch long, but I wonder what the future now holds for these parts? Anyone here destroy these parts on their SC400 before? I don't...

I have recently been re-introduced to this process; I used to make small, detailed orthopedic aids for a Doctor using this material, but an associate at my work has shown me where the technology has gone in the last few years. Think of the way fiberglass/epoxy casting, mold making and plug...

When was the very first time you had ever logged onto the web? I was on a commadore 64 back in "83, on a bulletin board.

http://alsacorp.com/chrome.htm If you haven't seen this paint, take a look; it could be pretty wild on an SC with all the curved surfaces and all. And if you mods figure that there is not any way that this could ever be sprayed on our cars just take it down... I tried to post this over...

I've had the idea of trying to find a Crown V12 and swapping it into my SC, in the process of dreaming I found this site: http://forums.hybridz.org/showthread.php?t=97350&page=1&pp=25 Thought it was pretty interesting, since I love V12 engines.

Has anyone added more cooling fans to their welder to get more performance out of it? Was looking at mine, and it looks like it may benefit from some more cool air.