Search results

  1. D

    Comp ratios/ ecu issues?!

    Installing v2 blower on 1uzfe stock ecu, using blow through on the afm, with stock pistons at current compression ratio of 10:1 only small amounts of boost can be ran correct,?! But I'f I change the pistons to 8.5:1 and ran higher boost will the ecu have issues with it or not ?!
  2. D

    removal of manifold sensors

    hey guys have finaly got my 1uz running but have removed sensors and am wondering what can be done to get it idling again, have been told i need to re connect the IAC, but i have removed the two sensors that have alot of vacum hoses attached, i have no idea what they do exactly, ( located on...
  3. D

    Manifold Actuator

    Hey guys I need to know what this thing is, an will removal of this affect the performance of my motor, or prevent normal operation?! Basically can I throw it away ?! http://i.ebayimg.com/00/$(KGrHqYOKiQE2i!wtKs,BNt7NnQ1Tg~~_35.JPG The black thing on the front of the intake manifold will upload...
  4. D

    first start up

    finally have the beast going only half an exhaust and not running 100% but fired first pop, if people are interested in hilux conversions and help and etc im more than willing to offer what i know. video isnt no depiction of the incredible noise this thing makes, as all 1uzfe fans know :D...
  5. D

    V2 1uzfe fish bracket

    needing cad files to the fish bracket if possible?? or do i have to buy them??
  6. D

    1990 celsiour

    hey guys got a celsiour, 90's model, when driving around it apears to have a fuel surge or cut for about 5 seconds, and has trouble idling, unless u give it a few revs when first started. any ideas what the go is thanks
  7. D

    banjos on fuel rail

    hey guys needing to know the size of banjo that goes on the left hand fuel rail, some how lost my old lines and struggling to remember what goes on there if anyone has one they can send me pm please thanks :)
  8. D

    V2 1uzfe fish bracket

    can some one tell me how far the v2 vortech sticks out from the front of the motor, using the lextreme fish bracket. using the harmonic balance and intake of the supercharger as reference points.
  9. D

    hilux wiring

    hey guys i got my wiring loom done by killa kustom kables in queensland in Australia, its for a conversion in a 84 hilux. basically i send the wiring loom off and they chop it and send it back with the instructions how to stick it back into your vehicle, im not the best with wiring, so if i can...
  10. D

    Forced induction information

    hey fella's im on the hunt for information. what is required to make my 1uzfe forced induction project complete. im talking ,cams ,pistons, ecu's just all the base information, on compression ratios, oils.... or links, i have looked around but its hard to find what im looking for. i have a...
  11. D

    need 1uzfe exhaust manifold cad

    need a cad file for 1uzfe exhaust manifolds, :) thanks
  12. D

    single or twin

    OK lextreme readers. this build was ment to be completed before Christmas but i keep changing my mind about stuff now this is the latest development. twin turbo ( t3t4) or single garret thing i have, here are the turbo details of each. Garret monster.= inlet turbine 55mm outlet turbine 60...
  13. D

    Wanted need one stuffed manifold

    hey fellas need one stuff manifold just trying to salvage the flanges off it
  14. D

    clutch slave

    righto here is the go, i have set up my clutch to test out whether my custom clutch set up is working ( 1uzfe to w58 supra gearbox manual conversion) so i bleed the clutch and get some one to press it when its in gear the tail shaft doesn't spin( its not connected to the diff) but the throw out...
  15. D

    clutch slave

    please check drivetrain thread: http://www.lextreme.com/forums/showthread.php?t=13452
  16. D

    Parts 1uz stuff for sale

    complete front sump.autobox. torque convertor ,power steering pump. ac. needs to go pm for prices
  17. D

    Parts front sump

    selling front sump from sc400 comes with sump, baffle, pick up and upper sump( bit that bolts to motor) all mint condition and clean $300.00 aus. will post
  18. D

    Wanted pre tensioner pulley

    need a pulley nothing else :) thanks pm please
  19. D

    x pipe

    looking to buy a x pipe 2.5'' in Australia or tassie. just something to do the job best place to look??? or any links to stuff
  20. D

    help needed

    looking for a pdf or just something to help me put my motor back together been a while and i have never worked on a 1uz before and cant remember 100% where things go


Top