Search results

  1. P

    porsche 944 s2 v8...in uk...

    Where did you get your flywheel done?
  2. P

    1uz block uk.

    its just for test fitting and trying things out on. Doesn't matter if it dead. needs to be cheap and in the uk.
  3. P

    1UZFE Twin Turbo Kit with VNT Garrett turbos

    ruishy what you been doing to the gypsies :D I'm be interested in the turbos and wastegates if its not sold and you want to keep the pipe work? let me know dude.
  4. P

    Modifications to 1UZ-FE with very low hood

    Change the intake manifold it sits pretty high :)
  5. P

    If Toyota Twin turboed the 1uz from the factory..

    ruishy1 I see you brought the kit in that link. I don't understand how you control the VNT is it just a actuator?
  6. P

    If Toyota Twin turboed the 1uz from the factory..

    For what I'm going to need psi/bar wise I think it will be ok. I think I'll get a set on cams in there and play with the heads a little. I will also have a different intake and exhaust manifold to stock as I feel they aren't the best design and would need alot of reshaping :( If all else fails...
  7. P

    If Toyota Twin turboed the 1uz from the factory..

    This was What I was going by :) http://www.mkivsupra.net/vbb/showthread.php?257801-1UZFE-Twin-Turbo-Conversion-Kit-for-Supra
  8. P

    If Toyota Twin turboed the 1uz from the factory..

    I was going for 2 Gt28s as going by the guy at 2bar tuning claiming the 28rs will hit 750bhp not the vnt25 hits 550bhp with 600+ tq 28s are cheap and my gearbox won't take over 600hp plus I think it would be to fast to drive :D
  9. P

    T70 1UZ S14 - Where's best place for o2 sensors?

    I wonder if the SR cross member/rack is the same as the KA. I think Its just going to take a big hammer to the tunnel when I get some free time :)
  10. P

    T70 1UZ S14 - Where's best place for o2 sensors?

    Yeah I made my own but I have changed them 3 times I have now built a second set that use a custom mount between the front cross member and stock ls400 lexus mount swaped left to right and vice versa just to play with the height. I'm don't know what bell housing/box you used but I have the...
  11. P

    T70 1UZ S14 - Where's best place for o2 sensors?

    I wish I could get my 1uz to sit that low. Mine hits the steering rack :( Looks a good build tho I like the red body and matching engine :)
  12. P

    TurboCharged 1UZ : hesitating while accelerating

    same as above? Do you have any pics?
  13. P

    Thin head gaskets.. More comp etc, etc

    How do you work out compression ratio? ie if the shock gasket is 0.059 with a 10:1 ratio what would 0.049(1.25mm) head gasket make it?
  14. P

    1uz intake manifolds and 1uz diet questions

    I've never done anything with cad I have design software but never used it :( Its something I'm meaning to look into as could be really helpful. No one seems to like the 1uz in the uk so parts and knowledge are slim on the ground we do have a lot of engines kicking about tho :) My plan was to...
  15. P

    1uz intake manifolds and 1uz diet questions

    $500 woww that seems a lot :O I asked autronic if I could see the cad plans. I did have the same thoughts xr8tt about adding them on at a later date. Its hard to get a set made in the uk as all the shops want a min order normally 10+ Is it possible to to use the early 1uz stronger...
  16. P

    1uz intake manifolds and 1uz diet questions

    I'm waiting on parts so I've started on other things. I better start buying up ls400 shock lower intakes so I can have a few attempts :D I can only just about mig weld steel So I think its safe to say I'd be better getting it done :)
  17. P

    1uz intake manifolds and 1uz diet questions

    Damm gonna have to find a good tig welder. Any tips for cutting the manifold? Bare in mind its the first time I've done anything like this.
  18. P

    1uz intake manifolds and 1uz diet questions

    Why are the flanges so hard to make? I've seen a few members say they are hard to make and they ones for sale are huge money. :S I"ve stripped all wiring and anything I don't think is needed off so only time will tell :D
  19. P

    1uz intake manifolds and 1uz diet questions

    First can I use the later 1uz intake manifold on a earlier 1uz two reasons for this 1. I can't shut the hood down. 2. The 92 earlier intake doesn't seem the best design. If I can't use the later 1uz are there any intake manifold flanges for sale or are they custom jobs? Second I have a...
  20. P

    v-eight.com whats wrong?

    I take it its now working and safe as the this may harm your computer has gone now?
Top