Search results

  1. J

    Idle Speed Control Valve clicking? (IAC)

    Hmm US would be same set but has water going to the EGR valves. Its kinda noisy, it clicks when you stop at the lights or drive off. Im sure it didnt do this before I touched the cooling system. Sounds, wrong to me, it's too loud for luxury car, the Japanese market Celsior (which I have)...
  2. J

    Idle Speed Control Valve clicking? (IAC)

    Hi all I just put a new water pump etc into the car and now. I think my Idle speed control valve is clicking. It sounds like its hunting around. Maybe I need to clean it and/or bleed the coolant. I’m not experiencing any idle or running problems.
  3. J

    Fluid leak above crank pully 1990 Celcior

    Yep It was the water pump. Bought an OEM replacement (16100-50023) for AUS$135 from Toyota, it didnt include the O rings. O ring larger one (96761-35035)AUS $3.54 O Ring bypass (96761-24019) AUS $3.02 So I bought those also from Toyota but I could have bought them cheaper from CBC I assume it...
  4. J

    thermosat hose to top or bottom of radiator??

    The bottom hose on the radiator on my 1990 Celsior goes to the thermostat outlet. Push or pull, both work well. which ever fits in easier. Perhaps fitting fan between radiator and engine would be perferable then the fan doesnt block air flow when driving.
  5. J

    Correct Drive belt for 90 Celsior

    Hi all Just finished replacing my water pump. And I bought a new Drive belt (fan belt), I recieved a Dayco 6PK2250 and it was challenging to fit. The belt I took off was a 6PK2275 (a bit longer?). Did I recieve the correct belt for a 1990 Celsior? (Hydrualic fan) Would the...
  6. J

    How to tighten crank bolt ?

    Anyone able to Loan/Hire one out to me in Australia? Perhaps the Local Lexus/Toyota car club (not). :veryhappy
  7. J

    How to tighten crank bolt ?

    Hi GUys I just finished taking my 1uzfe apart due to a bad water pump. how do I tighten the crank bolt up to 181ft/lbs. I can only get it to 90ft/lb. Do I need a good air gun? Thanks
  8. J

    Fluid leak above crank pully 1990 Celcior

    Hi I just bought a 1990 UCF11 Celsior last week, and I decided to change the engine oil. Which was straight forward, as expected. I put in 5L of Penrite semi synthetic oil and I bought a new Toyota Oil fiter (90915-YZZD4) and I also installed a new sump plug gasket (90430-12031). The car has...
Top