Search results

  1. Y

    Oil filter adaptor..

    go to gloverman.. Hi guys OK so the deal is I have a CNC mill and make the adaptors but do not own the rights to sell them. Gloverman is correct in that he is the automotive agent for selling the adaptors so he is the man you want to see when you want to purchase them. There is also a 45...
  2. Y

    Oil filter adaptor..

    will find out and get back to you.. Hi ALI1UZLUX I will find out and get back to you.. Cheers Craig
  3. Y

    Oil filter adaptor..

    cheers.. Hi gloverman Thanks for that.. Hi 4U2QUIK If the adaptors are still the kind of thing you are looking for let me know... There is another style adaptor that I make that swings the filter out to the side.. I will try to organize some pictures Cheers Craig
  4. Y

    Oil filter adaptor..

    err.. i think so Hi 4U2QUIK Thanks for the comment as for fitting around ac bracket and compressor I hope gloverman sees this and can answer for me as I am not really sure... Cheers Craig
  5. Y

    Oil filter adaptor..

    Hi guys Thought that I should show you a couple of pictures of the oil filter adaptors that I make and am about to fit to my motor..
  6. Y

    One part at a time...

    Hi guys I have been slowly collecting parts and thought I should post a couple of pictures.. Thought I should attach a couple of pictures of some of the stuff that I have been making recently.. Larger volume Rb26 oil pump gears and cover plate to suit. 4age trumpet flanges. and the...
  7. Y

    1uz/w59 bellhousing/r150f into Suzuki samurai

    someone is looking... Hi Zukijames Well done on the progress and thanks for posting the pictures. Sorry I don't always post replies to every thread that I look at but rest assured that I always have a look... Thanks for the inspiration to get my build underway.. Cheers Craig From the...
  8. Y

    toyotav8.com's R154 to 1uz adaptor install

    thanks 4U2QUIK... Ok thanks for the reply.. Suspected that might be the case... Cheers Craig
  9. Y

    toyotav8.com's R154 to 1uz adaptor install

    A question on set up... Hi 4U2QUIK I have enjoyed your thread on throw out bearings so thanks for taking the time to post... I have a couple of questions on setting up.. The picture that I have of my set up is with the spring removed and the bearing back as far as it will go. I...
  10. Y

    1 UZFE cut away

    Hi guys Thought you might like some pictures..
  11. Y

    Project Thread MK3 Supra / 1uzfe / Single Turbo Build Thread

    filter adaptor Hi guys I have noticed the occasional mention about filter adaptors and have managed to find a couple of old pictures of the last run that I did for the guys at SSS marine here in Christchurch. They sell them on www.trademe.co.nz I make 2 different types one points the filter...
  12. Y

    porsche 924 s/944 1uz swap...anyone fancy making an adapter...

    back from holiday... Hi Beario Sorry meant to reply to your e-mail.. OK so the material for the aluminium plate is $400 nzd The cover plate you have is different from the transaxle I have.. The only one I could find is $225 nzd including shipping.(assuming correct year) Then there will...
  13. Y

    getting her running

    ecu wiring.. Hi gloverman Sorry to hijack this thread.. Gloverman I have a 92 ecu and a cut loom that I want to run using a manual gearbox.. I have been told that a shielded wire needs replacing.. But the ecu checks out OK I was wondering if I sent you these parts could you wire up so that...
  14. Y

    porsche 924 s/944 1uz swap...anyone fancy making an adapter...

    just not sure about the measurements.. Hi Beario What it means is that until I am satisfied that the hole and dowel spacings are spot on I wont be putting an expensive chunk of aluminium in my machine.. I need to make a couple of jigs to check both the gearbox and motor as if they are off...
  15. Y

    porsche 924 s/944 1uz swap...anyone fancy making an adapter...

    Sorry Beario Hi Beario Sorry for being a bit slow to get back to you.. I have been checking over the file that I have got back from my CMM guy.. The only thing that bothers me is that when I mirror the file there is a 0.3mm difference in the dowel holes.. He also did the transaxle...
  16. Y

    porsche 924 s/944 1uz swap...anyone fancy making an adapter...

    funny you mention that.. Hi Beario Just working last night on the spacer/adaptor plate for my own 924 4 speed transaxle to 1uzfe project. It is just a little different in that it will be a mid engined V8 in a chassis of my own design so no torque tube.. I own a CNC machining business and...
  17. Y

    1UZ-fe: what's the measurement of this part?

    gasket measurement Hi Edward916 The length that you are after is 395mm from end to end on that gasket.. Thats on a 1992 1 uzfe... Cheers Craig Young
  18. Y

    Cobber's Cobra

    Wow nice car... Thanks I really enjoyed the pictures..:D A real credit to your skills.. Cheers Craig
  19. Y

    Avoid TTC Performance!!

    got to agree.. Hi guys Got to agree with 4U2QUIK about getting true position right.. I have a 3 axis CNC mill that goes to 0.001mm so I can machine out to close tolerance but even I wouldn't risk trying to hand measure an adaptor plate as it so easy to be 0.1 to 0.2 out and not even know it...
  20. Y

    3SGTE flywheel for 4u2quik

    oops.. Hi 4u2quik Well i guess a little one man band in New Zealand is not needed then.. Got to say that I wish I had that kind of hardware.. Oh well.. I will just have to work on it then.. :D Cheers Craig Young


Back
Top