Search results

multiply miles by 1.61 for km

yeah something i did muck around with on the XF, i went to a sender that has a similar resistance to the XF but i cant remember what it was, the lexus motor runs about 10 degrees warmer, which i think the EAs might have done anyway, i think if you fit the sender from your EA in there it will be...

good to see some more progress. i thought it would be finished by now, i might have mine going in another week(might not too???) keep up the updates very good reading for all thanks Dean

It Drives well it sort of drives, it drove up the ramps ok. i have to fit the remaining 4 engine mount base bolts and tighten the mounts bolts, then run a wire under the car from the speedo for computer, then fit the charcoal canister, and i think i'll have one more attempt at bleeding the...

cool, looks like a factory block too?(has a radiator) what times does it run?

Gday, got a couple of days off work so i have some more progress, ordered a CRS gearbox crossmember cos i CBF making my own. at $111 delivered and it fits perfect using the toyota mount. enough room also for the electronic speedo transducer too. pic of it is below. also Got My tailshaft early...

another great thread in the making. dont give up i want to see this finished... will it be road legal?

Mate keep the updates coming, we all enjoy watching and reading of plans coming together, and it gives us inspiriation and ideas for our own projects. i have never seen a car like yours it will be good seeing it transform into a new BEAST. thanks Dean

would a series/bank of relays do the trick? i had the sugestion made to me when i was considering the kit, the local speedo mob said it should be easy...?

I am Very much looking forward to the updates, i have been watching for a long time eagerly. thanks Dean

will contact you as soon as My car is proven Reliable, how is yours going lately? will be interesting to see the difference the turbo makes to the 1/4 mile time... thanks Dean.

Gday fellow Victorians, i think this section is for Meets and gatherings so.... i will want to run My car down the 1/4 mile at calder as soon as i feel it is not gunna blow up or chuck another tailshaft. i reckon its sort of central to Most people to a reasonable extent so i invite any that feel...

Gday, i tried to start the Beast a few days ago after sorting the wires, but had one left over and thought it might not be important.....Well the wire i left was important.(thanks to the wiring diagrams on this site, easily traced to computer pplug then referenced to pin numer = requires...

thanks for the pics, i was thinking maybe a smaller rubber mount would be easier? but i can do a similar Mod to My crossmember as you have there, probably just as Much work(something to think about Very soon) Dean

I went with Bullet on a full Kit, Great Customer service(i had at least 10 questions during the shipping time, and were reponded to Very quickly and helpfully the next day, or immediatly if i rang them,) the CRS bell housing is what Bullet use in their Kit(they say it is the most consistant in...

from either really, i would like to see the gearbox mount as i need to lower MY gearbox if i Use the Falcon crossmember. so if its say 2 or 3 inches lower than the toyota mount that would be good also.

any pics available? i have seen a 1UZ in a Holden kingswood ute or one tonner(cant remeber) it was running a W series 5 speed and i doubt it has aircon or P/S it was an LS400 engine is all i remember and it went well according to the owner.

would it be a good thing to make a hose come from that point and take it to a header tank fitted in the highest point available in the engine bay? say 1/4 inch inside diameter hose? i think in My falcon i am going to have to do something like that as the radiator is much lower Now.

i have heard one with straight twins, with ONLY a resonator in each.... not my cuppa tea, mine had a nice Note with the 2.5" single commodore muffler(hardly hear it now with a 250 falcon motor going through it) really hoping the 2.5" mandrel bent with turbo muffler will sound good when i hook it...

COOL, cant wait to see pics, ex fiited today(is that exhausts? which car the falcon???) will you post in here or start a new thread i dont Mind either way just let me Know how it goes, YEAH the wiring is the biggest **** to fit and work out, i didnt upset many wires, and the ones i did i...