Search results

I mentioned this car to a mate of mine that knows the owner, he said it use to run a windsor V8, but he hasn't looked back since the 1UZ conversion. He thinks it got a 9.8 on a fairly soft tune with more to come. It competed in the http://www.streetcarsuperstars.com.au/ in January and is...

Cobber, do you know what the injectors are rated at, I had a look at a very good vapour system - but to go above 200kw you had to go to larger injectors - with a $1200 increase in price.

lpg inljection Looks like a great system and I'd love to see it here in 6months, however, I've been following this for 5 years, and it's always been '6-12 months away from production' when I enquire - I wouldn't hold your breath! Costs - I'd guess around $3500 but most likely higher to have...

ecu controlling fans and fuel pump My ecu has 8 outputs (including 4pwm) and they are all earths (current sink to use youtr words?) with maximum current of 1 amp each - sufficient to drive a relay (mechanical or electronic) so this should be ok. I've had a lookat those ssr's, they have a...

Fan soft start Toysrme - how do you wire the capacitor for soft start - parallel across the two wires to take the load? And what size would you need - fairly hefty I imagine? My ecu (EMS 8860) handles the pwm for the fan etc but i'm interested in reducing the starting load as it's the...

sensor location Sounds good, and at least they are cheaper to replace than the factory ones!

What's the thoughts/experience on o2 sensor location - I was told to fit mine no closer than 1000mm (39 inches) as they will run too hot and overheat, requiring regular replacement? I ended up mounting it 750 mm (30in) from the turbo. I'm running a WBo2 dual wideband unit with external display...

Lot's of info on here about the 1uz Crown ecu, it happily runs with an auto. But yes, save your dollars and go aftermarket if you're boosting.

Crown Speedo - it's alive (thanks to a lextremer!) Many thanks to a fellow EH Lextremer! I was just sent the crown speedo wiring diagram - and it works! Now to just make it talk to my sensors etc.

what's it do on the 1/4 I agree, I was going to ask - but I lost interest in talking to the guy when he started bagging out his mates budget build next to him and talking about his $6000 braided lines - the way he was talking, any figures quoted would have to be taken with a pinch of salt...

Techedge with an Autronic My Techedge unit has been reconfigured (in the software) so that it outputs a 0-1volt signal instead of the 0-5 volt signal to work with the EMS 8860 ecu, so no reason why it can't be setup the same for the Autronic to directly give it the signal it's expecting?

Tech Edge WBO2 - dual o2 sensors and display The WBO2 unit from Tech Edge (http://wbo2.com/home/products.htm ) comes in single and dual display - I have the 3b1 dual display unit functioning. The pics below show the LA1g gauge I am using. Peter's a retired physicist who seems pretty switched...

8860 Autotune feature Quote - 'There was a version of the 8860 program manager that had autotune. You set the target a/f ratio and as you drive it adds or subtracts fuel to the correct fuel cell to get the a/f and the fuel map correct. It was very nice but occasionally got carried away if the...

No Bling beast Obviously a well built motor Rod to last that long! BTW - how's the 'no bling needed beast' going - where's it up to?

9300rpm? >

EH 1UZ TT - Video of startup Ok, started it up with new dual 2.5" mandrel bent exhaust - gee the turbo's knock the noise off! Here's a short Vid - only ran it for a very short time as still way too lean - using a crappy efi fuel pump and standard 220cc crown injectors -...

ems 8860 on 1UZ Happy to give you advice - found Peter at Ems in Sydney a great help. No COP, just sequential injection and and full spark (not wasted), the 8860 handles the standard Totyota coils, igniters, sensors, ISC etc. Pretty cool. And lots of spare inputs and outputs, plus can shut...

Aluminium fuel line I found 3m lengths of 10mm (8mm id) aluminium at Bunnings for $10, good for a fuel line.

Flex plate to torque converter torque setting Can anyone tell me the flex plate to torque converter torque setting please? Cheers Ed

Eh Yes, custom sump from scratch, rear mounted rack conversion from scratch. Looking forward to getting it finished and registered.