Search results

do you still have the auto box ?? if so i would like the kick down cable of it if thats ok :)

Hi guys, i have seen some 02 Sensors on ebay! are they any good or should i stay away from them, + what one,s should i get, as the ones on ebay, start at around 60$ and go upto 200$ please if you could help as i do need to get some new ones very soon. Thanks

Hi mate, if i was you i would take a good look around the site there is so much info on here!! and not only that if and when you do need help or info you are in the right place to get it, as the guys on this site are the best, and they are all ways only to happy to help, as for the loom there...

Hi mate, thanks for geting back to me about this, just dont want to go f****ing anything up, i will try what you have said and see what happens...

Hi mate, right on the ATL i have 2 big white wires, you say this go,s to the battery through a 120 amp fuse, this is the connecter on the end of the wire, do i conneted that to the battery or do i connect it to the fuse block, as in the next pic, and as you can see in this next pic, i...

what do you think guys, should i go for this? do you think its a good buy!

Guys i need your input with this, as im unsure?? I have an IS200 and i have just put the 1UZ in it, but my IS never came with an LSD + my old DIFF had had it before i did the swap to a 1UZ, but the thing with this LSD is i get the, Final drive kit fitted to it 4.5 any way here it is please...

Hi Tonyd, Thank you for that, thats alot of help....i have the IS wireing diagram, i was just unsure what each wire did on the LS400 Alt, and now i know :) Thanks, you top guy.........

Ok i know i need to use the 12v+ but i also have a plug with 4 or 5 wires, would any one know what ones i need to use, as im unsure :33:

HI Sideshow, you have a very good point there mate, about the 1g-fe ECU runs alot, i have most of the dash working!! i dont have air-con any more so thats one thing i dont have to get to work lol, i will try that with the Tacho,s and see what comes of it? Thanks for your feedback mate :)

yea thats what i was thinking, just did not know if there was a better place to tap into, Thanks for that mate :)

Hi guys, wheres the best place to take an oil feed from on the 1UZ for my "Turbo", on the IS200 when i fitted a turbo i put T connecter in the oil cooler line, is that the best way to go! or is there a better place to tap into ? Thanks before hand

Hi Tonyd, hhmm i think i know what plugs you are talking about, i have 2 plugs at the end of the loom, that dont connect to the ECU, like you say they go to the body loom, i will have alook.....now i need to see what wire i need from the IS200 side!! ill let you know how i get on. Thanks for...

I have her running but i dont have any RPM its not working? what wire do i need from the ECU to make this work ??

Hi guys, i have wired up the 1UZ to my IS200, the only thing i have not wired up is the alternator? can any one tell me what wires i have to use from the "alternator" Thanks

well i had alook tonight when i got in from work, im siting there looking at all the wires, and i see 2 wires that i over looked, they are 2 B-W wires comeing from inside the car, and they are from the IGSW and they goto the NSW on the LS400 ECU, as soon as i connected them she started 1st time...

Hi Zuffen,i will try that, as thats what it seems like! as soon as i let go of key it seems like its cuting power to the fuel/pump and thats why it stops, if it dont have power when i let go of key, How do i fix this if its that ? or what have i done, i must have a wire thats needs swaping round...

Hi guys, here are the pinouts of the IS200 ECU if any one could help that would be good, please let me know if i have missed any wires out IS200 ECU LS400 ECU 1993 Pin No-plug-color Pin No-Plug-color...

well i have gone over it all today and i can not seem to fined out whats up, Q ? the wires comeing from the starter i have a 12v + 4 wires , where do i connect the 4 wires ? Its still turns over and starts but as soon as i let the key go it dies, it as if once i let the key go it cuts...

Hi Sideshow, i will check them today, i will also check the wires, thanks for you feedback mate, I will let you know how i get on....... Nice website as well :)