Wanted UZS131/LS400 Fan Idler bracket and pulley

[Peewee]

As per title.

Looks like this.

The Soarer and the Celsior and later model Crown's came with hydraulic fan pumps, so not useable.



Can buy the bracket from the US, but not the pulley.
Hoping to get the whole thing in Aust, but will go OS if needed.

 

[Lextreme II]

I just removed one from the LS430 and should be ok. Let me know if you want it. Used but good. Shipping is $50 to your door. The bracket is free for you.

 

[Peewee]

Sounds good David.
PM me your paypal address and I'll transfer the funds.

 

[ice]

im looking for exactly the same thing if anyone has one lying around also

Cheers

Grant

 

[Zuffen]

Check the idler in this thread.

http://www.lextreme.com/forums/showthread.php?t=12392

This will work just as well as the LS400 and cost peanuts.

Easy task for a machinist.

 

[fordgt]

I've got a idler layin around at mine in alexander heights... ya can use your std belt on it and is good for clearance too
can have it for $50 need to grab it by friday as I'm flying up north

 

[fordgt]

Forgot add its been made with a bearing setup not the std pumps shaft as it looks in the picture. its just a NSK bearing ya can get from, but its still in good nick

 

[ice]

Rod that would involve being able to get into my garage to use the machines though

part numbers for anyone looking for them

16307A bracket sub assembly Fan ( this is the non pump one)

16371 pulley fan

and 16920 pump assembly ( the hydro one)

 

[ice]

Forgot add its been made with a bearing setup not the std pumps shaft as it looks in the picture. its just a NSK bearing ya can get from, but its still in good nick

See how i go this week theres meant to be a whole pump turing up cod in my post box, it it doesnt show ill get back to you !

 

[Peewee]

part numbers for anyone looking for them

16307A bracket sub assembly Fan ( this is the non pump one)
16371 pulley fan

Pulley - 16371-50020 - $150 NZD ex Japan 3 weeks.
Bracket - 16307-50010 - $375 NZD

Prices for anyone looking for them

 

[Smitherz]

Did you get a pulley yet?

 

[Peewee]

I ended up using the LS430 idler, worked a treat.