Swap a motor in 2 minutes and 47 seconds

The 1UZFE EGR Delete Kit is available for sale here.
No problem Tony. Anytime man. Just get the car running properly first then throw in the fish and make some noise.
 
I'll break your record by 1:59 minutes. I'm the one with the red bucket and I love it. It's 1 of the vital tools in this job. You can stand on it, sit on it, and you can dump your stuffs in it, too...LOL
 

Attachments

  • IMG_1199 (Medium).JPG
    IMG_1199 (Medium).JPG
    93.9 KB · Views: 6
  • IMG_1200 (Medium).JPG
    IMG_1200 (Medium).JPG
    89 KB · Views: 5
  • IMG_1201 (Medium).JPG
    IMG_1201 (Medium).JPG
    119.4 KB · Views: 5
  • IMG_1205 (Medium).JPG
    IMG_1205 (Medium).JPG
    107.3 KB · Views: 5
  • IMG_1206 (Medium).JPG
    IMG_1206 (Medium).JPG
    71.2 KB · Views: 5
  • IMG_1207 (Medium).JPG
    IMG_1207 (Medium).JPG
    86.1 KB · Views: 5
man you guys must have a good degreeser,looks like you made a mess under the car on the driveway.....
but bad ass job.
can i fly you guys in to help with mine?
i got a lift,and air.so we can do it in like maybe 35,45 seconds..:beerchug:
 
man you guys must have a good degreeser,looks like you made a mess under the car on the driveway.....
but bad ass job.
can i fly you guys in to help with mine?
i got a lift,and air.so we can do it in like maybe 35,45 seconds..:beerchug:
Sure. My mind is already about taking your engine out, and it's done. :laugh2:
 
Sorry guys I've watched it twice and I still can't see where or who was holding the beer?

LOL, the whole time, I was worried my slaves, I mean help, would get tired and not want to work anymore.

I fed them Doughnuts/coffee/gatorade...

The party will continue when the beast is breathing...hopefully with some FI...
 
Whos car? Also why did the front end/bumper and headlight come off?

SC engine is normally longer then an average car andmost cherry pickers are not long enough to clear the bumper. Since Mr. AcleanSC has AC body kit so we dont want to scratch it. I think this is the easiest way to take out a 1UZFE.

To remove the engine:
Bottom: ( 10 minutes)
* Exhaust (2 screws each side)
* Shift Linkage
* Tranny mount (8 screws)
* No need to remove the driveshaft. The slip on piece will come out with the engine.

Inside: (30 minutes)
* ECU plugs

Outside: (1 hour)
* Radiator and hydraulic fan
* Heater hoses
* Ground wires
* Ingnitor plugs and fuse plugs
* Tran cooler lines
* Fuel lines
* AC Lines
* Powersteering hoses

Less then two hours you can get the whole thing out.
 


Top