Injectors. 2 sets of 8

JustenGT8

New Member
I have 2 sets of 8 injectors FS, acquired in my various UZ builds.

7MGE 315cc/min high impedance- good for 400ish hp $200

RX7 550cc/min high impedance - good for 700ish hp $400

Plus post
 

JustenGT8

New Member
The 7m ones kinda do. Same clip but there's one little tab you need to trim down...takes 5 seconds with a stanley knife and doesn't affect a thing. I ran the 7MGT ones like this for years no dramas.

the RX injectors take a Bosch plug
 

JustenGT8

New Member
Make that 3 sets. Also FS my set of Evo 620's, low impedance. I ran these out to 411 rwkw on E85. Good for 500rwkw on 98
 

KingSC

New Member
I might need a set of high impedance injectors in a little bit. Keep us updated if anything changes.
 
Last edited:
Top