I require wiring diagrams of engine loom for Celsior model E-UCF21-AEPQK.

[knobhead]

Hi guys,
I am into my next transplant, 1UZ-FE 1996 front cut Celsior into a pommie classic Triumph 1970 TR6 with LT77 5 speed on rear end. I require wiring drawings as wiring is totally different than earlier model drawings when I did the Stag transplant in 2010. I am using a haltech sport 1000 ECU to drive the 1UZ in the TR6. The model of vehicle is E-UCF21- AEPQK. Celsior
Cheers and thanks, Knobhead. Perth West. Australia.

 

[George_R]

You will find very similar diagrams ('96 LS400) here at Lextreme. http://www.lextreme.com/misc.htm

 

[Infinity jon]

Hi guys,
I am into my next transplant, 1UZ-FE 1996 front cut Celsior into a pommie classic Triumph 1970 TR6 with LT77 5 speed on rear end. I require wiring drawings as wiring is totally different than earlier model drawings when I did the Stag transplant in 2010. I am using a haltech sport 1000 ECU to drive the 1UZ in the TR6. The model of vehicle is E-UCF21- AEPQK. Celsior
Cheers and thanks, Knobhead. Perth West. Australia.

Did you get the 1UZ in the Tr6?
I’m about to try the same thing. any pointers and info appreciated. Cheers. Jonathan