custom made 1GZ parts list

redrocco

Member
I have started working on my 1GZ-FE engine and I will be makeing some custom parts for it. I figured since there is just about zero aftermarket for this engine I will post a list and pics of the parts I am makeing and the price in materials that each cost me to make. If any one else would like me to make them a set too that could be aranged for the cost of materials and like $5 to $10 per hour for the machineing. If there are any parts that I haven't put on the list let me know your idea and I will see what I can come up with.

The list so far

Billet fuel rails.
AN8 rail costs aabout $15 per foot shipped and 2 22" pieces are needed so $60 in materials per set so I would sell them for about $100 plus shipping for a set.

304SS header flanges.
still working on this but looking at 1/2 thick stainless.

Billet 4140 fly wheel for tillton triple plate clutch
makeing a few of these right now as they will also work on my 1UZ. $150 each plus shipping

Stroker kit to use honda B16A forged H beam rods and forged pistons on a reground 1GZ crank. Not shure how much of this I will be makeing myself but would be more then happy to explain it for free.

Mounts for 1GZ into what ever car I wind up putting it into. I will know more once I pick a car.
 

reaper

New Member
is there a wrist pin diameter defference between the 1gz and b16? 4age also has 81mm bore have you looked into them? also the 6a13t turbo galant motor has the same bore and stroke. i think the wrist pin is damn near the same

idea of what the b16 stroker kit displacement would be?
 
Last edited:

redrocco

Member
the 1gz and the b16a both have a 21mm wrist pin. I am not shure how close the 4age and 6a13t rods are. The b16a has such good aftermarket support that forged rods for it would be much cheaper and more common.
 

rpk2012

New Member
Def going to keep an eye on this thread. This is my next motor and I plan on fitting in an scx00 or sc430 chassis. Or I'll just get another mkiii supra for it!
 

88Supra

New Member
I have started working on my 1GZ-FE engine and I will be makeing some custom parts for it. I figured since there is just about zero aftermarket for this engine I will post a list and pics of the parts I am makeing and the price in materials that each cost me to make. If any one else would like me to make them a set too that could be aranged for the cost of materials and like $5 to $10 per hour for the machineing. If there are any parts that I haven't put on the list let me know your idea and I will see what I can come up with.

The list so far

Billet fuel rails.
AN8 rail costs aabout $15 per foot shipped and 2 22" pieces are needed so $60 in materials per set so I would sell them for about $100 plus shipping for a set.

304SS header flanges.
still working on this but looking at 1/2 thick stainless.

Billet 4140 fly wheel for tillton triple plate clutch
makeing a few of these right now as they will also work on my 1UZ. $150 each plus shipping

Stroker kit to use honda B16A forged H beam rods and forged pistons on a reground 1GZ crank. Not shure how much of this I will be makeing myself but would be more then happy to explain it for free.

Mounts for 1GZ into what ever car I wind up putting it into. I will know more once I pick a car.
Any up dates? Just ran across this motor and wanna put it into my Supra! Only issue is tue crossmember looks like it would be in the way.
 
Top