Item: Coilover setup 91 Single cab Hilux chassis + body
Location: Hobart
Item Condition:
- Chassis with rear 4 link Air Ride triangulated 4-Link with cost for the kit $990 alone
- 'Living Low Customs' C notch
- McDonald Bros Adjustable coilover brackets
- Gearbox cross member modified
- Tail shaft centre bearing cross member modified for higher mounting to stop driveline vibrations
- Bottom wish bone are modified to fit coilovers
- Top wish bones are modified to fit coilovers (need a bit more work)
- VN commodore fuel tank with intake efi fuel pump
- Drop Spindles
- Custom 28mm front sway bar
- Whole chassis striped to bare metal and sprayed with etch pimer and then hardened chassis paint
- Oversized battery in battery box, 150amp swtich fuse, battery cut-off swtich
- 4x QA1 Coilovers Extended Length (in) 14.250 in.
Collapsed Length (in) 10.130 in.
2x QA1 10inch 150 pound springs
2x QA1 10inch 300 pound springs
2x QA1 9inch 550 pound springs
- Hilux body tubed front and rear
- Tinted windows
- Tray with lifted aliminum floor and removable sections
- Marine carpet in tray
- full 4wd front and guards
- extra cab tailgate
- Solex door locks
- new ignition barrel
- hiden wiring
- Lots more...
- Lots of spare...
- 5x standard wheels included. 19inch wheels are extra
- All modifations are approved in theory by Tasmanian transport (all paperwork is included)
- Steve Caplice (Approved Transport Engineer in Tasmania) has inspected the chassis before painting, done full inspection with fully finished and done a lane change test at Baskerville Raceway. He has completed his full report but missed the 1 year end date of my application.
- Paper work included
Also comes with 1uz engine mounts and 4 core radiator to suit. Contact me for more information.
Reason for selling: New project
Price and price conditions: $4900 (big reduction, I don't want to end up cutting this thing up to sell!!...)
Location: Hobart
Item Condition:
- Chassis with rear 4 link Air Ride triangulated 4-Link with cost for the kit $990 alone
- 'Living Low Customs' C notch
- McDonald Bros Adjustable coilover brackets
- Gearbox cross member modified
- Tail shaft centre bearing cross member modified for higher mounting to stop driveline vibrations
- Bottom wish bone are modified to fit coilovers
- Top wish bones are modified to fit coilovers (need a bit more work)
- VN commodore fuel tank with intake efi fuel pump
- Drop Spindles
- Custom 28mm front sway bar
- Whole chassis striped to bare metal and sprayed with etch pimer and then hardened chassis paint
- Oversized battery in battery box, 150amp swtich fuse, battery cut-off swtich
- 4x QA1 Coilovers Extended Length (in) 14.250 in.
Collapsed Length (in) 10.130 in.
2x QA1 10inch 150 pound springs
2x QA1 10inch 300 pound springs
2x QA1 9inch 550 pound springs
- Hilux body tubed front and rear
- Tinted windows
- Tray with lifted aliminum floor and removable sections
- Marine carpet in tray
- full 4wd front and guards
- extra cab tailgate
- Solex door locks
- new ignition barrel
- hiden wiring
- Lots more...
- Lots of spare...
- 5x standard wheels included. 19inch wheels are extra
- All modifations are approved in theory by Tasmanian transport (all paperwork is included)
- Steve Caplice (Approved Transport Engineer in Tasmania) has inspected the chassis before painting, done full inspection with fully finished and done a lane change test at Baskerville Raceway. He has completed his full report but missed the 1 year end date of my application.
- Paper work included
Also comes with 1uz engine mounts and 4 core radiator to suit. Contact me for more information.
Reason for selling: New project
Price and price conditions: $4900 (big reduction, I don't want to end up cutting this thing up to sell!!...)
