1UZFE Q&A (All Must Read)

[Lextreme II]

Here are the two most compenhensive articles about 1uzfe and swap... A must read for all potential swappers.
1UZFE Article By Rod Garnett (Zuffen)
1UZFE Article By Phil Bradshaw

 

[tombraider329]

re 1 UZ

Hi Lex

My name is Charlie, and i am posting from Manila Philippines. I just got myself a used 1 UZ engine from Japan and i am comtemplating on swapping this on to 1 of my land cruiser projects. There is one available 5 speed manual 4x4 transmission from a toyotal 2L engine... Can you please point me to a topic or forum if this combination has been tried by an of the members . Any info would be greatly appreciated. Thanks and warmest greetings from the Philippines !

 

[tombraider329]

re 1 UZ

sorry double post

 

[Lextreme II]

Do a search in this forum. Lots of info about this swap....

 

[Jamie e21]

That was an amazing read!!! Everything I wanted to know answered Now to source my parts ^^

 

[Zuffen]

Go here http://www.lextreme.com/1uzfe_variants.html it was 30mm above this thread in the same section!

Try searching it works.

 

[Jamie e21]

Go here http://www.lextreme.com/1uzfe_variants.html it was 30mm above this thread in the same section!

Try searching it works.

I actually meant time to source my parts locally at my wrecker... lol!

 

[69international]

would just like to note that not all the r series 4x4 boxes' transfer cases are actuated via an electric motor.

my r150f box is stubby lever shifted.