The 1UZFE EGR Delete Kit is available for sale here.

HendoZ

New Member
Messages
10
Location
Evansville, IN
Well as every story has a beginning. So does this one.
I have always had a soft spot for Z cars. When I turned 19 I was working at a local auto parts store making barely better than minimum wage. but I still lived at home with the parents. So I decided why not go out and buy an expensive sports car? Well I searched for months and months and couldn't find any good deals on a Z car. I finally found a 2005 350z for a really good deal. Long story short I started to do research and found that Z cars had been around since the 70'z. I found the S30 to be much more attractive than any other model of Z. It was the first of its kind. Who wouldn't want that?
A few years later after toying with the 350z. A once in a life time opportunity found me. A buddy of mine asked me to go look at a 240 with him. I assumed it was a 240sx simply because that's the sort of crowd I run around with. When we get to the location of the car. I was awe struck by a 1972 240z covered in dust. My friends intention was to daily drive the S30. So first thing first was to see if it would start. according to the owner, it never failed to fire up. Except this time. My buddy ended up telling the guy he didnt want it if it wouldn't start. I of course asked him how much he wanted for it. The guy told me 500!!! I looked over it all again. I only had 400 to my name. I told him that's all I had but I really wanted it. He told me that he needed to move the car soon because the landlord wouldnt let him have so many vehicles. (he was already at 6 cars on his land.) So I picked up the little 1972 240z for 400 even.
7025e747.jpg
I immediately got to work on getting the car running. It was all too difficult it just needed an ignition switch and carb cleaning.
37cf4206.jpg
D-1CB0-4888-8D4A-432A1E1F028C-162-000000270F04D107.jpg
I then quickly grew bored of the lack of power the little 2.4 straight six had.
I was on the hunt for more power.
I found a ready to run 1UZ for 400 in a local city, with wiring harness and swap mounts for a mk3 supra.
2-5D4C-4168-B5A3-3D9CBB19ACFE-162-0000002706B174D4.jpg
I did some research and found that there was an adaptation kit to mate a 1uz and 350z six speed.
I also picked up this gym from a friend who works at the nissan dealership in town.
9-ADBF-498E-A180-4D41D4CDF919-361-0000003620CDA501.jpg

With the MK3 supra swap mounts the 1uz BOLTS IN.
-FAB8-4537-B647-EEDE5D243F1C-3103-00000344FDA8A1E0.jpg
transmission adaptor plate.
1uzfetoz33.jpg
test fit with motor and trans.
-7516-4251-BDB3-6C33B27C65D9-9351-000007834FCACA95.jpg
ACT stage 3
150941_10151473131055350_605992222_n_zps732f8677.jpg
484348_10151555206115350_1048385859_n_zps69026361.jpg
346-12B7446F3F80-4376-0000043B25F8429C_zps09f760aa.jpg
284-4E9D5B789361-4376-0000043B35E4D136_zps4eafa816.jpg
7F3-A9091C230F84-4376-0000043B479E55FA_zps4f5737a5.jpg
E27-A3D00552DBC1-4376-0000043B70D7D11F_zps0fc27887.jpg
More to come soon.
P.S. Thank you all for your info. without this site I couldnt have done any of this. Oh yeah I searched! :D
 
Welcome on board.

I guess you found 400ZED's swap from years ago in the archives.

Looking good and not much invested in it.
 
I heard of him but I never actually saw a build thread. I in fact have no idea what transmission 400zed used. I'm currently under the assumption that I have the only 240z 1uz with a 350z six speed. I've heard of other attempts and a few 260's but not 240's, its a small difference. I would really like to see 400zed's build though just to know what he did. I do have videos of me driving it down the street but they're of poor quality.
 
Nice i love the 240z. That car got me into cars. My step dad had one when I was young and I fell in love with it. Never had the chance to get my own.
 
400Zed used the standard auto the UZ cane with.

The engine sat quite high and way forward as the sump wouldn't clear the cross-member.

That was back in the "good old days" when there was almost nothing available for the UZ engines.
 
wow! very cool! it look like my mounts put it pretty close to the firewall.

Yeah I had to swap the mounts around left to right and right to left. it sets about 85% of the engine behind the struts. and it allows for the transmission swap bracket to line up.
 
This model was my first choice when i decided to do a TTUZ build...i couldn't find a suitable car in Oz at the time :( I would still like one one day (maybe with a Coyote 5.0) but i doubt i'll ever want to stump up the dollars thay are asking for them these days?
 
I'm very happy with the power of the 1uz in this car. It also helps that the 1uz sounds amazing! I searched for a long time to find the right car. I had no idea that this project was going to even happen. most of the large components sort of fell into my lap.
 
had a few pm's about gear ratios of the 6 speed.
gear ratios of the 350z 6 speed.
1: 3.794:1
2: 2.324:1
3: 1.624:1
4: 1.271:1
5: 1.000:0
6: 0.794:1
 


Top