Search results

  1. D

    Most Aggresive cam without shim under bucket?

    bump looking at option 3, or would that not work on the street?
  2. D

    looking for 300whp on a 1uz (NA)

    http://www.lextreme.com/forums/showthread.php?t=9292
  3. D

    looking for 300whp on a 1uz (NA)

    adaptronic ecu and a custom 8 throttle body setup (pics and vids in my threads)
  4. D

    pros and cons for bore size?

    Here are my recommendations: · N/A Application: .020" overbore and stock compression ratio · Supercharger: .015" overbore with stock compression · Turbo (Mild): .015" overbore with 9.5:1 compression ratio · Turbo (Wild): .010" overbore with 8.5:1 compression ratio so you reckon to go...
  5. D

    pros and cons for bore size?

    want to order up some pistons and rods before opening up the engine. (want all the parts before i take it to a builder) just wondering whats the go overbore?? pros and cons...?? be for a n/a build.
  6. D

    Most Aggresive cam without shim under bucket?

    hmmm good to know anyways 3 options: http://www.camshaftshop.co.nz/index...._view.tpl.html http://www.camshaftshop.co.nz/index...._view.tpl.html http://www.camshaftshop.co.nz/index...._view.tpl.html
  7. D

    Most Aggresive cam without shim under bucket?

    would these be ok?
  8. D

    Most Aggresive cam without shim under bucket?

    was actually looking at 207-d and 207-e though was told not go higher than 9.5 lift
  9. D

    Most Aggresive cam without shim under bucket?

    whats the highest lift you can do? and safely my next step is cams + headwork how important would it be to send the flow results to match the cam currently making 237rwhp i want to crack the 300rwhp mark with the cams + headwork ofcourse changing to heavier duty valve springs too...
  10. D

    looking for 300whp on a 1uz (NA)

    i made 237rwhp with: itbs headers/exhaust ecu manual for comparison
  11. D

    Parts Bolt on 8 throttle body setup for 1uzfe + filters

    2 airbox setups come with the car (found the other one today) 1 to fit with the trumpets attached. 1 to fit with the trumpets removed. both use the same air filter with same base plate only have pictures of big box setup, other airbox looks exactly the same except scaled down to size a lot...
  12. D

    Parts Bolt on 8 throttle body setup for 1uzfe + filters

    The old restrictive upper manifold gets removed, this kit is from head up (its own runners) fuel rails could come with the kit at the right price (i will need to find some stock ones to replace) stock motor (just exhuast, custom headers) ecu i was using was an adaptronic. There was still a lot...
  13. D

    Parts Bolt on 8 throttle body setup for 1uzfe + filters

    Might be going back to stock (this will only be available for a short time only, so if you are serious let me know, otherwise be going back on) Cannot get this kit anymore, discontinued. Rare vertical setup, Designed from the head up (some just bolt on to he standard runners), looks and sounds...
  14. D

    Vendor Ross Forged Pistons Special

    none for n/a friendly builds?
  15. D

    Parts richwood supercharger kit for 1uzfe

    what power did it lay down?
  16. D

    Cars For Sale UZZ31 Soarer for sale - custom kit and leather

    91 UZZ31 soarer, low kms - around 92,xxx i think. ill double check tomoz. Just passed pits (orginally came from NSW) will be giving it 6months rego this week. All electrics - sunroof, windows, mirrors, seats. Mods: Resprayed black with a tinge of blue/green coming through at certain light. 2.5...
  17. D

    Parts [SYD] 1uzfe Engine (Forged Pistons/Rods, Adaptronic ECU, Ported Heads)

    id be keen for the heads if you decide to part. cheers.
  18. D

    Parts K&N pod filter with adapter to suit 1uz

    as title says 100ono
  19. D

    MY 1uzfe ITB's result

    stages before manual.


Top