Search results

Cheers Gloveman Thanks for your time and help it’s greatly appreciated

Hi All I’m trying to find a thermostat that’ll open at a lower temperature then the stock 82 degrees Celsius. If anyone can please help me out that’d be greatly appreciated. Cheers

Hi Mate Yes all theses things have been checked and everything seems to be working as it should. Yes it’s very sluggish compared to my Hilux with the exact same setup apart from the Hilux had a 5 speed manual!, so I expect the auto to be a slug box which it is I’ve had it on the Dyno and all...

Hi It’s got the stock diesel radiator. And not much more I can add about the setup that I haven’t mentioned in the original post above. I haven’t got a temp gauge with temperatures on it apart from the standard temp gauge, but I’ve had to stop many times due to it overheating!, I had the Exact...

I had the exact same setup in my Hilux for 15 years and never had any problems at all. So this is why I’m at a loss.

Hi All Please Admin if this post is better located to another area please do. Cheers I’ve currently got a Toyota 4Runner with an imported 89 model 1uz engine in it. It’s an 89 model engine so exactly how long the engine has sat around for is anyone’s guess,. My problem is I’ve got a bad over...

Cheers Gloverman I’ve got nothing on my tailshaft, so not exactly sure what that means?. Just a pity there wasn’t an easier way to make the auto crack a bit harder, So is it worth me trying a latter ecu or how will I tell if I’ll fit and if it will fit what exactly will this achieve?. Cheers

Ok thanks Do you know if the gen 2 ECU’S work in the gen 1? And if so is it just a simple swap? Cheers mate

Ok cheers Gloverman so I’m guessing that kicks it back to first gear then? Thanks mate

Hi All Just wondering if the 1uz-fe Auto box is meant to kick back/drop down from second/third gear to first gear? Due to my engine and box being put into another vehicle I’m wondering if there is something missing that makes it kick back to first or not!. I’m guessing there would be as it’s...

Hi All I’m having an interesting issue with not being able to open my throttle while in Park or Neutral!, it won’t Rev over 2700Rpm to me this seems very unusual as I’ve never owned a vehicle that’s done this before!, So if the throttle is opened and I try to Rev it over 2700Rpm it’ll Rev to...

Hi All I’m having an interesting issue with not being able to open my throttle while in Park or Neutral!, it won’t Rev over 2700Rpm to me this seems very unusual as I’ve never owned a vehicle that’s done this before!, So if the throttle is opened and I try to Rev it over 2700Rpm it’ll Rev to...

Hi Gloverman Ok well I wasn’t aware of that and thanks for that I’ve now contacted the guy about the wiring loom and about the data port and a Rev limiter if there was one installed on it or not. And hopefully I’ll get some answers as I don’t think the econ switch works either but I’m not sure...

Hi Gloverman I’d been told that the early models never had a port inside as you had to take notice of the flashing of the engine light , and the port under the bonnet needs to be bridged with a tool or paper clip , but that’s just what I’d read and been told by the guy who did the wiring...

Hi Gloverman Thanks mate for your input it’s greatly appreciated!. I thought it was a bit strange that it was doing this just in Park n neutral and it happens at approximately 2700Rpm. I’ve got no idea personally it was just suggested to me that it might be a inbuilt Rev limiter protection...

I’m not sure if the wiring is correct or not? I got told it was a Rev limiter to stop it being damaged? It only dose it in park or neutral as it doesn’t do it while driving! But I’m not sure as it doesn’t do it on my other vehicle. It was wired up by a professional that has done them engines...

Hi I’ve never had a aftermarket ECU before but I’m wanting to get some more power and better driver ability, So a setup for the highway to cruise and a performance/power setup also. So I’ve got an early model 1uz approximately a 92 model with the stock auto gearbox/slugbox behind it. I’m...

Hi Everyone I’m just wondering about the different ECU in the 1uz-fe engine’s I think mine is around a 92model engine , I’ve got a new car with a 1uz in it but this one has some type of Rev limiter on it as when it’s out of gear you can’t Rev it over approximately 3 thousand RPM if you Rev it...

Hi Thanks for your help and input. Is there a way I can find out what ECU it’s running? All I knew that it was a stock one! But in saying that, this ECU is different to the one in my other 1uz! This one has some unusual Rev limiter in it as you can’t Rev the engine out of gear over somewhere...

It’s just running the stock 1uz ecu and I’m running headers on it and it’s a 92 model 1uz engine as well. Cheers