Search results

  1. V

    MSD or After Market Ignition Upgrade

    I've just finished re-wiring a lexus twin turbo with a Wolf 3d and MSD into a mates car. The MSD system is using a DIS4 which is firing 4 holden v6 coils (ignitor module removed). The distributors aren't used anymore. The MSD DIS4 is not directly compatible with the MSD so i made a small...
  2. V

    Anyone running 4 coil waste spark on a 1uzfe yet?

    I won't be putting it in the car for a little while yet. I've got to custom re-wire the back end of the car(where the ECU is), and Fatty's still got to move the fuel cell, transmission cooler, and fit a remote oil cooler. Once all thats done I can wire it all up perminant and it should work a...
  3. V

    Anyone running 4 coil waste spark on a 1uzfe yet?

    Thanks for the info. Knowing the firing order was the only blank I needed filled out. I shouldn't have any issues wiring the MSD as I'm familiar with installing these when connected to WOLF ecu's. Cheers, Ian
  4. V

    The latest news on Anthony's Twin Turbo 1uzfe

    Sorry i've been away off the forum for quite a while... I'll be doing an ignition upgrade on the car soon. MSD DIS 4, 4 coil linked to the Wolf 3D V4. I'll be happy to share some maps etc. I'll be taking a bunch of new photo's of the car now that the engine and running gear is in a VN, and...
  5. V

    Stand Alone (Part II)

    I'd recommend a WOLF 3D V4. The ONLY part you will have a little trouble setting up is the crank and cam triggering, and there is enough of these combinations working around that between users on the forum you will get things all nutted. After you've got it running, you'll have twice the MAP...
  6. V

    Anyone running 4 coil waste spark on a 1uzfe yet?

    Hi All, I'm about to install an MSD DIS4 with 4 x dual output coils onto a 1UZFE soon, but need to know which cylinders to pair up. Has anyone done this before, or am I about to do some trail-blazing? Cheers, Ian Swinkels
  7. V

    1UZFE wiring diagrams... where did they go?

    You da man! Thanks for that.
  8. V

    1UZFE wiring diagrams... where did they go?

    Hi Lex, I can't seem to locate the PDF files of the 1uzfe diagrams for the SC400 on the website anymore. The link refers to http://www.lextreme.com/misc.html I recall there being a whole bunch of downloadable PDF files that are very useful. Can you please email me the PDF file for the...
  9. V

    The latest news on Anthony's Twin Turbo 1uzfe

    Tell me your email address and i'll email you the map directly. Also, your private message box on the forum is full and you can't receive new messages anymore... you might want to look into that.
  10. V

    The latest news on Anthony's Twin Turbo 1uzfe

    Be VERY careful with running a map from someone elses car... There is a lot of things to consider. In all likelyhood it might allow the engine to start, but be careful that its not running lean. This particular tune was running 45psi idle fuel pressure (at vacuum) and close on 60 something...
  11. V

    The latest news on Anthony's Twin Turbo 1uzfe

    Whats an M&W? Got a link? Personally I like the idea of running 4 coil waste spark with nice strong MSD sparks. From the "Don't use MSD" i'm guessing you had a bad experience? I've never run an MSD on a 1uzfe, but I have seen them on RB30DET's, Holden v8's and I have one on my vw...
  12. V

    The latest news on Anthony's Twin Turbo 1uzfe

    More info... I've attached a few files. Pictures of the fuel and igniton maps, plus the ECU config file for the WOLF 3D V4 ecu. You can download the ECU software from WOLF and view the config file offline. The load graph from 0 - 107% indicates the range from -14.7lb to 20lb of the internal...
  13. V

    The latest news on Anthony's Twin Turbo 1uzfe

    Well yes the car is still around but its changing form a little. First up, the diff has been removed in favour of installation of a shortened 9" F100 diff, and the rear suspension is being upgraded to a 4 link system. The spool center of the old borg warner diff was on the verge of breaking...
  14. V

    Subaru Air to Water Intercoolers, Anyone cut one up?

    I'm afraid I don't have a pic of a subaru water-air intercooler anymore... but as for the SR20 S14/S15 intercoolers, you could probably find a pic on ebay easily.
  15. V

    Subaru Air to Water Intercoolers, Anyone cut one up?

    I was going to mod a scoobydoo intercooler at once stage, but they are a wierd shape and I couldn't get it to fit inside the engine bay properly. I went for a pwr instead. I reckon the best option for a boat (if thats what its going into), would be to score a couple of Nissan S14 or S15...
  16. V

    PWR Intercoolers

    I'd be keen to know what quality problems have been seen, because frankly the quality of my barrel intercooler is awesome! perfect tig welds, fully polished, but most importantly it works. A mates got an air to air pwr on his car as well and is happy with the quality also. I think they also...
  17. V

    PWR Intercoolers

    From memory the 4x6 barrel coolers are rated around the 300-350hp mark. The larger the cooler the more stable the air temp will be as boost climbs. I see about 2 degrees climb in ambient air temp from 0 to 16psi with my 4x8 cooler. Provided you can get the coolant temps down to ambient...
  18. V

    Anthony's TT Burnouts and Brenton's Centura

    Yeah i've updated my website and moved the media to a diferent folder. I also got rid of the smaller file, so there's only the 11mb movies available for download now. Here's the new link. http://www.cairns.net.au/~nqeaho/Media.htm Cheers, Ian
  19. V

    Fine Line between Oil and Cooling

    Just a suggestion... consider looking at one of these for oil pressure regulation. They are designed for oil pressure regulation on wet and dry sump engine systems. http://www.drysump.com/filtadpt.htm About your smoking turbo porblem. Do you find an excessive amount of oil is wetting the...
  20. V

    Methonal Injection Harm???

    You shouldn't be having to worry if methanol is corrosive to the engine or not, because you should be fitting the water spray nossle just after the throttle body anyway. If you have it before the blower, yes you might damage the blower. Water will not vaporise anywhere near as well as...
Top