REGISTER NOW TO REMOVE ADS FOREVER

Search results

  1. C

    Complete M112 Supercharger Kit (Adaptronic ECU, Innovate MTX-L, AEM W/M kit)

    Water Meth Kit Sold, MTX-L Wideband Sold. Adaptronic ECU Package & Fuel Injectors still for sale! Standalone ECU Package Adaptronic E420D Basic Select ECU [E420D Wiring Loom:.5 meter (1.6') long Adaptronic 1UZFE PCB Defeater Board Adaptronic Air Temperature Sensor Adaptronic...
  2. C

    Complete M112 Supercharger Kit (Adaptronic ECU, Innovate MTX-L, AEM W/M kit)

    M112 Blower & 1UZ parts package sold. Everything else still for sale. Thank you Justen. :)
  3. C

    Complete M112 Supercharger Kit (Adaptronic ECU, Innovate MTX-L, AEM W/M kit)

    Everything brand new in box. Full M112 Kit. Everything is brand new except the M112 which came off a low mile Cobra. M112 & Custom 1UZ Package M112 from SVT Mustang Cobra 2004 Custom 1UZ Lower Manifold for M112 M112 to 1UZ Throttle Body Adapter Modified 94.5 Fuel Rails w/o 7th...
  4. C

    1UZ Vortech V3 Si, Nitrous, Titan Line Lock, AEM FIC 8 & Failsafe Wideband, and MORE

    I'll sell you the V3 Si with the rebuild kit for $875 shipped. I can ship it from the US and bite the duty charge for you. I live close to the NY border. The rebuild kit is from http://www.superchargerrebuild.com/ with a mechanical seal. Only the seals need to be changed but I ordered the...
  5. C

    1UZ Vortech V3 Si, Nitrous, Titan Line Lock, AEM FIC 8 & Failsafe Wideband, and MORE

    All Prices are Shipped Price AEM FIC 8 $350 AEM Failsafe Wideband BRAND NEW $200 (worth $300) NX Maxmizer 4: Progressive nitrous controller $275 BRAND NEW (worth $400) GTspec Rear Strut Bar BRAND NEW $140 Denso Supra TT F/P BRAND NEW $140 Used Kyosan (Denso copy) 280 high flow Supra TT F/P...
  6. C

    Clean400's Centrifugal Supercharged Nitrous 1UZ

    So I was talking with my tuner about my idea to go non-intercooled and he was super against it. So I told him I would order an air to air intercooler then and he asked if I ever considered an water to air intercooler. I said I never did because I thought they would cost a lot. In the end it...
  7. C

    Supercharging with Fish Bracket...

    Clean looking setup :) Must be fun.
  8. C

    Supercharging with Fish Bracket...

    Apparently it's really simple to rebuild. There are some guides out there. You will need a press. I ordered my rebuild kit from supercharrebuilds.com Make sure to get a rebuild kit with mechanical seals as I've read the the other types of seals tend to leak. You can actually source the...
  9. C

    Clean400's Centrifugal Supercharged Nitrous 1UZ

    Nice. Maybe I won't have to buy that expensive 2nd gear sprag from ATF afterall. It's so expensive at $800. I did some more shopping and got some more needed parts for the build. Battery Relocation kit with Box and Wires for $100. From a seller called merchantsellers on ebay. Ordered...
  10. C

    Supercharging with Fish Bracket...

    It looks like from your picture that your vortech is not CCW. Maybe your setup is different? Are you using the fishbracket? This would make a difference in what pulley you would need for a certain PSI.
  11. C

    Clean400's Centrifugal Supercharged Nitrous 1UZ

    Nice that is very promising. I would be going with the Red Alto HD clutches too. I was also considering the ATF billet 2nd gear sprag. Your running close to 400whp and the stock 2nd gear sprag is said to break around 340whp so maybe it can handle more than I thought.
  12. C

    WTB: Fishbracket for 1UZ Supercharger

    Looking for a 1UZ supercharger fishbracket for my vortech. Thanks!
  13. C

    Supercharging with Fish Bracket...

    I`m ordering my spacers from www.onlinemetals.com I`m them cut stainless steel round tubing into this size. Stainless T-304/304L Seamless Tube 0.75" x 0.12" x 0.51" Cut to: 4.1339" 6 pieces total cost $60.82 Another Lextreme member mickesandra with an sc400, fishbracket and...
  14. C

    Supercharging with Fish Bracket...

    7/16" x 127mm bolts Length of the spacers are individual. Michesandra used 106mm spacers. You can use many superchargers from the vortech V1, V2 and V3. You can also use the Procharger P1SC and D1SC. I'm going to order a 3.48" pulley and this should give me an estimated 6psi of boost...
  15. C

    Clean400's Centrifugal Supercharged Nitrous 1UZ

    Thanks. Hey Steve how's your built auto holding up? What's your auto build?
  16. C

    Clean400's Centrifugal Supercharged Nitrous 1UZ

    Clean400's Centrifugal Supercharged Nitrous 1UZ Let's start off with the mods I've done so far. Suspension Setup: NF210 / Tokico Blues Comfortable suspension, more sporty than stock. Only a slight drop. Great for people who want to keep that Lexus feel. Suspension is very smooth...
  17. C

    Single Turbo 1UZ MKII Supra Project

    Wow the fabrication work that goes into this build is insane! Keep up the awesome work !
  18. C

    Terrible running SC'ed SC400

    You forgot to mention you're running a blow off valve. I forget which thread it was in but I don't think it's necessary that to run a blow off valve with the centrifugal setup. Another person on Lextreme had issues. I'm not to knowledgeable when it comes to superchargers but I think everyone...
  19. C

    Nitrous on 1UZ

    I remember a guy with a wet nitrous kit on clublexus posted his dyno numbers. With a 150 shot of nitrous he put down 300hp at the wheels. I don't think his bottle was up to full psi either.
  20. C

    1UZ-FE project into a minivan

    You could always put your seat in the middle of the van lol. That would be quite funny to see.
Top