Recent content by wavesailr

  1. W

    Standalone ECU Wolf V550 coil on plug conversion issues

    Just needed a different perspective. Thanks for the helpful advice.
  2. W

    Standalone ECU Wolf V550 coil on plug conversion issues

    SOLVED!! The problem was that the Sync/Reference signal was 90 degrees off from where I expected it to be (Cylinder 1 at TDC). So, I had to reconfigure the ignition offset so that Cylinder 4 fires first. The firing order is exactly the same, but starts 90 degrees later. I have attached the Wolf...
  3. W

    Standalone ECU Wolf V550 coil on plug conversion issues

    cribbj, Thank you so much for the help. Before the conversion, I was running the stock ignition system with twin coil distributor setup, as per OEM, with external igniters. I'm now running Denso 673-1308 coils which I thought did not need external igniters. I can see that I am getting spark...
  4. W

    Standalone ECU Wolf V550 coil on plug conversion issues

    I'm running a 1992 1uzfe from an LS 400 on a Wolf V550 ECU. The engine was swapped into a 1992 4Runner and was running beautifully before doing a coil on plug conversion using Denso coil packs. After configuring the Wolf V550 to run sequential fuel injection and individual coils, I can't get...


Top