Recent content by krayn

  1. krayn

    1uz fe vvti good or not

    Sorry. My bad. Getting confused with a non vvti.
  2. krayn

    1uz fe vvti good or not

    With a standard set up they start falling over past 5500. so not a ot gained by reving a standard set up past 6..
  3. krayn

    Merry Christmas to All

    Thanks Alan, I too hope everyone has a safe and memorable time.:):):)
  4. krayn

    Spark issues.

    I see. So you run this in series with the circuit your testing, ie take plug lead off, plug onto this variable gap device, then from device to earth, and run engine. Ive orderd some leads today. Will have more idea after this weekend.
  5. krayn

    Spark issues.

    Thanks for the replies. At the moment i have gapped plugs to .030". Made it a little better when i closed the gap up a bit. Running NGK bkr7e. I think I will try and track down some genuine ones. Although im reading good reports on the NGK ones too. George. Thanks for the pic...
  6. krayn

    Spark issues.

    Ive replaced the coils and it still seems to mis and fart at 5000 rpm. i convinced myself its not the spark leads as we swapped them over from another engine when i was at dyno shop and it made no difference. I took all the leads off today and measured them. one was completly open circuit and...
  7. krayn

    Spark issues.

    Thanks fellas, I think I will probly go this way of the ls1 coil. To repair the system i have it will require new leads, caps, rotors and coils. I think i could do it for less going the ls1 coil way. Cheers Kris.
  8. krayn

    Spark issues.

    Hi Rod, Ones like these? http://www.ebay.com.au/itm/Holden-LS1-5-7L-Coil-Packs-/261692201582?pt=AU_Car_Parts_Accessories&hash=item3cee121a6e#ht_146wt_922 So i would also need another two ignition drivers as well. Looks like the ls1 type dont have built in drivers.
  9. krayn

    Spark issues.

    Thanks for that.. I only have four ignition drivers in my stand alone ecu( wolf 3d). Do you think i could pair up two of the coil on plug ls1 type and run it in wasted spark mode? Sounds messy to me... But if i had 8 ignition outputs, i would be going the ls1 coils for sure..
  10. krayn

    Spark issues.

    Hi all. I went for a dyno session yesterday, and it turns out i have an ignition problem. Its breaking down badly at anything over 10 psi. changed leads, still the same. At this stage im looking at replacing plugs, leads, caps and coils. Does any one have any suggestions on what is a...
  11. krayn

    V8 Supra MK3 1UZ Twin Turbo from Germany - Part II

    Great set up you have done. A real credit to you... Do you have any video? Im contimplating making a short runner in the next year or so, but when it come time to design, i will purchase a engine building program called pipemax. It allows you to work out optimum runner lengths to suit the...
  12. krayn

    E85 fuel map

    Cheers that would be great..
  13. krayn

    E85 fuel map

    here is a wolf fuel map. its not the map for my engine.
  14. krayn

    E85 fuel map

    In milliseconds. Will try and post up a screen shot
  15. krayn

    E85 fuel map

    Yeah i doubt it wil transfere accross. I will input values manually. Its time consuming, but would like a base map to work on. Even a screen shot of a map would be great
Top