Recent content by BoxyShazam

  1. B

    Back to Basics: 1UZFE Improvements

    If more Americans knew how awesome these engines were we wouldn't be able to get them for so cheap! Shhhh.
  2. B

    1uz into mx73 cressida

    So finally received all my parts. Updates coming very soon. The transmission test fit/mutilation is currently underway
  3. B

    I need a Gasket set

    My buddy just ordered a gasket set from this site. It took about a month due to a little mix up but they're still selling them.
  4. B

    I need a Gasket set

    You know the site you are currently on sells them?
  5. B

    1uz into mx73 cressida

    Adapter plate arrived. Clutch Masters six puck Z33 transmission is too big for the x7 transmission tunnel So the tunnel mods have started
  6. B

    Eliminating cats

    Of course you can do it but you'll get a check engine light. The light doesn't hurt anything though.
  7. B

    1uz into mx73 cressida

    Sorry I didn't see this sooner I haven't been active here forever. My power steering just bolted up with the stock lines. Are you sure the lines that go to the radiator aren't transmission cooler lines? Anyway I sold my old transmission and adapter to my buddy who is putting a uz in his old...
  8. B

    Cressida 1uz swap running terribly

    Yes it was a giant furball lol. No the catalyst had busted and become an obstruction. I got the cat at a little Mexican exhaust shop super cheap. There was only about 3/4 of an inch cat material on each end and the rest was hollow. Very poor quality. Not sure If it melted and busted up or if I...
  9. B

    Cressida 1uz swap running terribly

    Yes I checked all those things except getting the injectors cleaned. Sorry I didn't post more info, I didn't want to clog up the post too much. Found the issue. It was a very clogged cat
  10. B

    Cressida 1uz swap running terribly

    I am aware of the codes and their meanings but like I said they've been there since the beginning. Could itreally take 5 months for the code to cause any problems?
  11. B

    Cressida 1uz swap running terribly

    I've got an 88 cressida with a 90 ls400 1uz in it. It was running great for 4-5 months. One day on the way home from work I noticed it was a good bit slower than before. Over the next week it got worse and worse. Now I can't even drive it anywhere because its so slow. It's throwing codes 21 28...
  12. B

    1uz into mx73 cressida

    Check out this one. My buddy did the wiring for me so I won't be much help there. http://www.oldschool.co.nz/phpbb/viewtopic.php?f=2&t=29128#p727866
  13. B

    1uz into mx73 cressida

    Anyway here's some more pics. This was it when I got it back. Too much rake for me Pulled the wheels off to adjust the sweet ground controls Got it much more even and stopped scraping on flat ground lol One more of the engine. Don't mind the clamp its temporary :p Now goal is...
  14. B

    1uz into mx73 cressida

    https://www.youtube.com/watch?v=1PwvC2ATNMQ&feature=youtube_gdata_player Quick vid of the gauge cluster and a little revving. This thing is a beast and I hope to get it to the track on the 10th
  15. B

    1uz into mx73 cressida

    Well it runs great but is throwing 3 codes. 2 o2 sensor codes and a knock sensor code. Knock sensor is completely snapped in half so that was to be expected. The o2 codes are being thrown because I've only got 2 of the 4 o2 sensors hooked up. Are any of these a big deal? As in do they pull...
Top