gearbox adaptor plates.

[Pro]

okay guys here's your chance to get something out in the open.

if someone wants to measure a

1UZFE bellhousing
W58 bellhousing and an
R154 bellhousing

and provide ALL dimensions on a clearly marked and neat drawing (can be by hand - i can interpret things) and PM it or post it up via JPG, PDF - whatever - i will draw the two different adaptors in both a PDF and DXF/DWG format and post for all to use.

while you're at it you can also post up a sump flange diagram for those that need custom sumps.

for the gearbox plates i WILL need the shaft centreline to mate the two drawings, everything else will just need simple LxW dimensions and diagonals if possible.

the quicker we get to it, the quicker we can get some adaptors made up.

chop chop!

[MaxPower]

Seen this thread??
http://lextreme.com/forums/showthrea...&highlight=trd

[Pro]

that i had not!

thanks for posting that - they are slightly incomplete (no larger radius dims etc) but it's a great start!

[Peewee]

Sign up and look at this forum
http://v-eight.com/tech_forum/viewforum.php?f=40

[Pro]

i see cebby has just signed up.

i'm still waiting for my confirmation email

[Pro]

okay - awesome site. i see the flanges are from this site originally as well.

i will contact RMS for a DXF file now.

[Pro]

i also just realised i have a sump in the shed, so i will go fish it out and measure up for those who need a DXF file for custom sumps.

[cebby]

Originally Posted by Pro

i also just realised i have a sump in the shed, so i will go fish it out and measure up for those who need a DXF file for custom sumps.

That would save me from doing it...

I was planning to make a tracing and have it scanned by a buddy.

[cebby]

Originally Posted by Pro

i see cebby has just signed up.

i'm still waiting for my confirmation email

Check your spam folder. Mine came instantly.

[Pro]

okay i have contact rms for the DXF files for the 1UZ bellhousing pattern.

i need to know if anyone out there has an R and W box that they can pull some measurements off. i don't need radius but i need LxW for curves and my machine can work it out from there.

i have the basic bellhousing bolt hole positions only, but i REALLY need the curves and outlines.

even if anyone in WA has an old bellhousing they can drop off to me over the weekend for me to measure, i would be grateful.

cheers.