Lextreme: Lexus-Toyota V8 Forum

Go Back   Lextreme: Lexus-Toyota V8 Forum > General Topics > Trade
Custom Search

Trade This section if for trading parts. No vendors please. What are you offering?


Reply
 
Thread Tools Display Modes
  #1  
Old 10-20-2015, 01:01 AM
George_R's Avatar
George_R George_R is offline
7th Grader
 
Join Date: Sep 2010
Location: Russia, Moscow
Posts: 799
Default Toyota/Lexus ECU reprogramming

I'm starting to offer new service, in addition to immo off (see http://www.lextreme.com/forums/showthread.php?t=16344)

Currently supported are
Lexus LS430 / Toyota Celsior UCF30 , 6a/t only
Lexus GS430 / Toyota Crown Majesta UZS186, 6a/t only
Lexus IS250 / Toyota Mark X
Toyota Tundra 5.7 , all years
Toyota Sequoia 5.7 , all years

With more to come. So far I can only do ECUs dated from 2003 onwards
OLDER ECUs ARE NOT SUPPORTED

ECU should be sent to me for reflashing

Currently available options:
-power/torque increase
-disabling catalytic converters monitoring, sub o2 sensors, charcoal canister monitoring
-disabling a/t related DTCs and fail safe modes for manual transmission install

power/torque increase is achieved by changes made to the following parameters: (ignition advance map including base calibration, max retard values, and THA/THW correction as well as adjustment per VVT position ; fuel map including base calibration and dynamic enrichment values; changing VVTi base maps)

Price is $400 USD for any list of supported options
__________________
# My build thread http://www.lextreme.com/forums/showthread.php?t=16753
# "Engine conversion" means driving a shitbox which costs a whole LEXUS to own
Reply With Quote

  #2  
Old 10-20-2015, 10:11 AM
4U2QUIK 4U2QUIK is offline
Approved Vendor
 
Join Date: Oct 2009
Location: Modesto california
Posts: 1,176
Default

http://www.supramania.com/forums/sho...embly-Analysis

would this help with the older pcm?
Reply With Quote
  #3  
Old 10-20-2015, 01:24 PM
George_R's Avatar
George_R George_R is offline
7th Grader
 
Join Date: Sep 2010
Location: Russia, Moscow
Posts: 799
Default

A friend of mine actually does this to *OLDER* ECUs which I can not care less for
These use 8-bit Motorola-derived processors

Newer ECUs like those for 1UZ vvti and 3UZ (2000-2003) use 16-bit controllers, but these seem to be mask ROM programmed (i.e. one time programming that is part of crystal manufacture process). Apparently these can be run off external memory, like this is done in my Tom's tuned ECU for 1uz-fe vvti. But the method ultimately needs desoldering of old processor and installing some add-on board.

Even if someone manages to read factory firmware from such ECU, I would not bother even trying to do that lot of precise handwork. In fact I even don't rely much on my Tom's ECU and always have a spare factory ECU in my car.

What I offer for newer ECUs is purely software thing and that's reliable enough to me.
__________________
# My build thread http://www.lextreme.com/forums/showthread.php?t=16753
# "Engine conversion" means driving a shitbox which costs a whole LEXUS to own
Reply With Quote
  #4  
Old 07-25-2016, 06:13 PM
George_R's Avatar
George_R George_R is offline
7th Grader
 
Join Date: Sep 2010
Location: Russia, Moscow
Posts: 799
Default

Prices went down
$250 for reprog now
__________________
# My build thread http://www.lextreme.com/forums/showthread.php?t=16753
# "Engine conversion" means driving a shitbox which costs a whole LEXUS to own
Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 07:13 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.