Wrecking UZZ31 in Brisbane

[pwd]

Complete car for parts, I have kept a few items for myself, the motor has a shredded timing belt and appears to have bent valves.

Here is a list of some items.

91 UZZ31, non EMV Soarer.

Dark Grey leather interior, complete with door trims, window surrounds, console, seat belts jesus straps and glove box etc. $700

Could possibly separate if no interest in everything as a package.

General condition of interior is very good.

Tele tilt steering column--$150
External chrome window and door trims-- $150
L/H and R/H door mirrors--$90
V8 engine loom non TRC type--$100
L/H and R/H doors, bare--$140 each
L/H and R/H external door handles--$40 each
L/H and R/H front guards--$100 each
Bonnet, --$150
Black front lip, factory one, very good condition--$100
Pair of clean high beams--$60
Air cond compressor--$200
Power steering rack--$150
V8 Harmonic balancer--$150
Wood grain door and dash trim--$80
L/H and R/H Window regs, pre 94 type--$140 each
Grey gear lever, excellent condition--$110
Steering wheel ordinary condition--$50
Air bag for steering wheel--$50
Rear bar--$120
Boot spoiler, slight damage--$70
Fuel filler door--$20
V8 radiator good cond-- $150
L/H and R/H inner door handles--$40 each
Front lower control arms--$150 each
Front upper control arms--$150 each
UZZ31 dash loom, non EMV, suit some one
changing from EMV to DVD touch screen.
Comes with A/C screen which has bleeding.--$200

There are other parts contact me to see if I have what you need.

All prices are plus postage for smaller items, bigger items are pick up or organize your own courier.

Every thing is being posted on other forums so if you want something call me on 0413432761

I am not on the internet all the time, so call if you need something.

[DenZel]

alternator?

[Detomaso17]

hi,
do you still have the complete wiring harness?
and if so is it the 40, 40, 40 pin ecu that it plugs into?

[Zuffen]

A 1UZ won't bend valves with a broken or shredded timing belt.

The valves will never hit the pistons so the engine is better than you think.

[pwd]

Rod
I put another w/pump and t/belt on the motor and did a compression test on it and they ranged from 200lbs down to 60lbs , it had 3 clys with less than 100lbs of compression.
Did not pull the heads off, but have seen another 1UZ with bent valves, and it had the same things wrong with it that this one did.
Sold it to a tuning shop here in Brissy for a rebuild that they were doing.

[BigEv]

do you have the power steer pump??

Evan

[DRF72]

Do you have anything left?? chasing a passenger side interior door handle and the light bulb plug from the indicator and driving light in the front bar??

[pwd]

Sorry mate everything has gone.

Paul.

[DRF72]

Bugger thanks for the speedy reply.

[pwd]

Have a look on Soarer Central, there are a few guys parting out Soarers there.