UZFE Family Compatibility

[Lextreme]

Here is something John Cribb and I created. I hope this spreadsheet can clarify some questions. If you see any mistakes, please let me know. UZFE Family Compatibility

[skid]

A simple spreadsheet but you can tell there's an awful lot of work gone into it. Well done.
M

[cribbj]

Originally Posted by skid

A simple spreadsheet but you can tell there's an awful lot of work gone into it. Well done.
M

I came up with the simple spreadsheet, and David did all the rest!

It's fair to say it's a work in progress; if anyone wants to take a crack at filling in any of the other 896 empty blanks, your input would certainly be appreciated!

John

[Lextreme]

Thanks Skid,

Please let me know if there is any error. I would like to put more interchangeable parts, but the trying to fit into one page is very tough. As noted on the bottom of the page. The new heads will fit, but you will also need the rest of the parts to make it work along with different piston design. I think 2uzfe block with 3uzfe upper would be cool.

[UZZ30-Québec]

Simple and very well done!

[Lextreme]

Here is what I came up. Spent two hours on it. Please let me know if there are any mistakes.

[mossyoak]

helpful great job

[sc400injen]

you've been alot of help through this year and just wanna give you props and say thanks for the all the knowledge

also, i'm about to pull my 1uz out of my 92' sc4 and just wonderin if you have any tips, this'll be my first pull
i'll compensate u too, let me know


-Knowledge

[sc400injen]

refferring to the whole lextreme family and mr. Lextreme himself

[gutbruito]

miss.raiqathe second onei love this family and i hope that to be an active member in this big familythank u walaawith my regards