turbo

  1. F

    Faster than a GS350? Better value than a Genesis 5.0?

    Hi, New member here and am busy reading the various threads. I suspect my questions are already answered so thanks for the patience as I locate them. If you wanted to point the way that would be great. Or if you wanted to wait a few days for me to find the answers on my own and then add any...
  2. DZM

    3UZ Stock Piston Limits

    What boost have people reached on stock 3UZ pistons? Im building a 3UZ with early thick rods and arp head studs, rings gapped for boost and full rotating assembly fully rebalanced. Will be running a Holset He400 Turbo. Engine is on Megasquirt MS3. will be running 99ron pump fuel. Aiming to...
  3. S

    Plans For My 94' SC400 These Next Upcoming Years :)

    Hello everyone, I'm creating this thread more of for myself but I encourage anyone who has any kind thoughts and knowledgeable information to post here too (hopefully we can stay on topic). :) As you can tell by the title, all this thread is just my personal blueprint layout for my plans on my...
  4. haroon131

    Best combo of UZ block and head for N/A and Forced.

    Hello everyone, I want experts to put some combination here for Max output as N/A and Forced. like which generation block (1UZ gens or 2UZ or 3 UZ) with which head (VVTi/Non-VVTi). I thank you all for seeing and replying.
  5. B

    supercharger or turbo?

    okay looking for opinions and suggestions for my next project.. looking to ad FI to my 1uzfe swapped 4runner. basic low down= engine:90 ls400(all emissions stripped) all stock otherwise drivetrain: R150(factory v6 runner drivetrain) fuel supply: factory 90 v6 runner...
  6. L

    LS400 single turbo project

    Hi, I'm starting the turbo project on my car. It's a 1990 ls400 with stock 1uz and 260,000 miles. I got a Holset HX35 from a friend and want to put it on. I am making a list and I have so far thicker head gasket and arp head studs, intake piping, etc, and I was going to go with the Apexi SAFC I...
  7. A

    1uzfe head specs?

    Hey there im currently building a 1uzfe 94 twin turbo engine for my jetboat, have cut a head open through the ports to see how far I can take them out, but before I attack my heads ill get a plan for the valve situation ,has anyone measured the 3uzfe valves to see if they are interchangeable...
  8. K

    Standalone ECU What is the best standalone for single turbo 1UZ?

    Best bang for the buck? I understand Motec M880 / M800 is one of the best, but the price is pretty steep. So what's a cheaper standalone that can manage the 1UZ well and offer traction? Thanks!
  9. K

    Wanted Wanted: 1UZ Performance parts

    Hello, The title says it. Looking to purchase performance parts for a 500HP 1UZ single turbo built. Rods, pistons, studs, cams, bearings, etc? Let me know what you have. Thanks!
  10. L

    need help starting a FI 1uzfe project

    hi i would like to know what you think of the following set up: older model 1uzfe motor (as they seem to be able to handel more hp) twin hi mounted t3 turbos integrated inter-cooler spitronics emu and spitronics transmission system built a340 tranny (lextreme torque converter and sift...
  11. B

    92 SC TT build in Kuwait, nissan box

    Hi, I am planning a twin turbo build for a 92 1uz sc I have most of the parts I think I need but would like an opinion as I am new to the UZ. I am more familiar with working with 2JZ engines. The original plan was a 2JZ swap, as I started looking for something more unique the plan became a 1JZ...
  12. T

    GS400 Turbo or Supercharge?

    So Here it is- I want to boost my car. It is a 99 GS400 with VVTi &E-shift. I have am immediate budget of about $1800 and a complete budget of about 4-5k$ I will like to have extra power as soon as possible. I am willing to try supercharging fro now due to $ and then later move to...
  13. D

    84 hilux 1uz conversion

    hello all, im new to this site but have been a member of boost cruising for a few years and no one on there could help me with my build. Im looking at putting a 1uz into a 1984 hilux dual cab. i was originally running a standard 1g-gte supra engine but spun a bearing and cant find the stuff...
  14. D

    84 hilux 1uz conversion

    hello all, im new to this site but have been a member of boost cruising for a few years and no one on there could help me with my build. Im looking at putting a 1uz into a 1984 hilux dual cab. i was originally running a standard 1g-gte supra engine but spun a bearing and cant find the stuff...


Top